No abstract

We present a 2-D plasmonic crystal design with visible band-gap by combining a 2-D photonic crystal with TM band-gap and a silver surface. Simulations show that the presence of the silver surface gives rise to an expanded band-gap. A plasmonic crystal defect cavity with Q ~300 and mode volume ~1.9x10(-2) (λ/n) (3) can be formed using our design. The total Q of such a cavity is determined by both the radiative loss of the dielectric component, as well as absorption loss to the metal. We provide design criteria for the optimization of the total Q to allow high radiative or extraction efficiency.

Effective, permanent tuning of the whispering gallery modes (WGMs) of p-i-n doped GaN microdisk cavity with embedded InGaN quantum dots over one free spectral range is successfully demonstrated by irradiating the microdisks with a ultraviolet laser (380nm) in DI water. For incident laser powers between 150 and 960 nW, the tuning rate varies linearly. Etching of the top surface of the cavity is proposed as the driving force for the observed shift in WGMs, and is supported by experiments. The tuning for GaN/InGaN microdisk cavities is an important step for deterministically realizing novel nanophotonic devices for studying cavity quantum electrodynamics.In recent years, there has been tremendous progress in the understanding of lightmatter interactions (cavity quantum electrodynamics, or cQED) in semiconductor systems [1][2][3][4][5][6][7][8] . Strong coupling has been observed for GaAs-based cavities coupled to embedded InGaAs quantum dots 2, 3, 4 , and studies have also extended to other semiconductor materials 5 . Such studies provide a promising route to the realization of quantum information technology 6-9 and ultra-efficient light emitting devices 10, 11 . In particular, InGaN quantum dots (QDs), well coupled to GaN-based optical cavities offer the potential of highly efficient devices operating at room temperature in the

Abstract:We present a design of plasmonic cavities that consists of two sets of 1-D plasmonic crystal reflectors on a plasmonic trench waveguide. A 'reverse image mold' (RIM) technique was developed to pattern highresolution silver trenches and to embed emitters at the cavity field maximum, and FDTD simulations were performed to analyze the frequency response of the fabricated devices. Distinct cavity modes were observed from the photoluminescence spectra of the organic dye embedded within these cavities. The cavity geometry facilitates tuning of the modes through a change in cavity dimensions. Both the design and the fabrication technique presented could be extended to making trench waveguide-based plasmonic devices and circuits.