fields such as healthcare, automotive, and aviation. Among them, flexible and wearable electronics exhibit a growing interest such as implantable medical devices, [1] wearable health monitoring systems, [1,2] flexible displays, [3] and smart clothes. [4] Conventional devices utilizing rigid and relatively unsafe lithium-ion batteries (LIBs) as the power supply cannot satisfy the future requirements of biocompatible and flexible features. Moreover, the bottleneck of flexible LIBs, such as the high cost, safety issues and intricate manufacturing requirements restrict the commercialization of flexible LIBs. As promising alternatives, aqueous zinc-ion batteries (AZIBs) have attracted a significant attention. They are regarded as competitive candidates for flexible devices owing to the high volumetric capacity (5855 mAh cm −3 ) of the zinc metal and its facile fabrication process. Meanwhile, the superior cost advantage, $25/kWh [5] for AZIBs comparing to $135/kWh [6,7] for LIBs, is beneficial to applying AZIBs in different scales of devices.Aqueous zinc ion batteries (AZIBs) currently suffer from unfavorable water-induced side reactions that result in zinc dendrite formation, dissolution of cathode materials and the formation of byproducts on cathodes, thus causing a fast capacity fade. Owing to the water electrolysis (stable Owing to the development of aqueous rechargeable zinc-ion batteries (ZIBs), flexible ZIBs are deemed as potential candidates to power wearable electronics. ZIBs with solid-state polymer electrolytes can not only maintain additional load-bearing properties, but exhibit enhanced electrochemical properties by preventing dendrite formation and inhibiting cathode dissolution. Substantial efforts have been applied to polymer electrolytes by developing solid polymer electrolytes, hydrogel polymer electrolytes, and hybrid polymer electrolytes; however, the research of polymer electrolytes for ZIBs is still immature. Herein, the recent progress in polymer electrolytes is summarized by category for flexible ZIBs, especially hydrogel electrolytes, including their synthesis and characterization. Aiming to provide an insight from lab research to commercialization, the relevant challenges, device configurations, and life cycle analysis are consolidated. As flexible batteries, the majority of polymer electrolytes exploited so far only emphasizes the electrochemical performance but the mechanical behavior and interactions with the electrode materials have hardly been considered. Hence, strategies of combining softness and strength and the integration with electrodes are discussed for flexible ZIBs. A ranking index, combining both electrochemical and mechanical properties, is introduced. Future research directions are also covered to guide research toward the commercialization of flexible ZIBs.

A three dimensional (3D) polyaniline (PANI)-graphene nanoribbon (GNR)-carbon nanotube (CNT) composite, PANI-GNR-CNT, has been prepared via in situ polymerization of an aniline monomer on the surface of a GNR-CNT hybrid. Here, the 3D GNR-CNT hybrid has been conveniently prepared by partially unzipping the pristine multi-walled CNTs, while the residual CNTs act as "bridges" connecting different GNRs. The morphology and structure of the resulting hybrid materials have been characterized using transmission electron microscopy (TEM), scanning electron microscopy (SEM), Raman spectroscopy and X-ray diffraction (XRD). Electrochemical tests reveal that the hierarchical PANI-GNR-CNT composite based on the two-electrode cell possesses much higher specific capacitance (890 F g(-1)) than the GNR-CNT hybrid (195 F g(-1)) and neat PANI (283 F g(-1)) at a discharge current density of 0.5 A g(-1). At the same time, the PANI-GNR-CNT composite displays good cycling stability with a retention ratio of 89% after 1000 cycles, suggesting that this novel PANI-GNR-CNT composite is a promising candidate for energy storage applications.

The practical applications of transition metal oxides and hydroxides for supercapacitors are restricted by their intrinsic poor conductivity, large volumetric expansion, and rapid capacitance fading upon cycling, which can be solved by optimizing these materials to nanostructures and confining them within conductive carbonaceous frameworks. In this work, flexible hybrid membranes with ultrathin Ni(OH)2 nanoplatelets vertically and uniformly anchored on the electrospun carbon nanofibers (CNF) have been facilely prepared as electrode materials for supercapacitors. The Ni(OH)2/CNF hybrid membranes with three-dimensional macroporous architectures as well as hierarchical nanostructures can provide open and continuous channels for rapid diffusion of electrolyte to access the electrochemically active Ni(OH)2 nanoplatelets. Moreover, the carbon nanofiber can act both as a conductive core to provide efficient transport of electrons for fast Faradaic redox reactions of the Ni(OH)2 sheath, and as a buffering matrix to mitigate the local volumetric expansion/contraction upon long-term cycling. As a consequence, the optimized Ni(OH)2/CNF hybrid membrane exhibits a high specific capacitance of 2523 F g(-1) (based on the mass of Ni(OH)2, that is 701 F g(-1) based on the total mass) at a scan rate of 5 mV s(-1). The Ni(OH)2/CNF hybrid membranes with high mechanical flexibility, superior electrical conductivity, and remarkably improved electrochemical capacitance are condsidered as promising flexible electrode materials for high-performance supercapacitors.

No abstract