Abstract:Imaging of large and dense objects with grating-based X-ray phase-contrast computed tomography requires high X-ray photon energy and large fields of view. It has become increasingly possible due to the improvements in the grating manufacturing processes. Using a high-energy X-ray phase-contrast CT setup with a large (10 cm in diameter) analyzer grating and operated at an acceleration tube voltage of 70 kVp, we investigate the complementarity of both attenuation and phase contrast modalities with materials of various atomic numbers (Z). We confirm experimentally that for low-Z materials, phase contrast yields no additional information content over attenuation images, yet it provides increased contrast-to-noise ratios (CNRs). The complementarity of both signals can be seen again with increasing Z of the materials and a more comprehensive material characterization is thus possible. Imaging of a part of a human cervical spine with intervertebral discs surrounded by bones and various soft tissue types showcases the benefit of high-energy X-ray phase-contrast system. Phase-contrast reconstruction reveals the internal structure of the discs and makes the boundary between the disc annulus and nucleus pulposus visible. Despite the fact that it still remains challenging to develop a high-energy grating interferometer with a broad polychromatic source with satisfactory optical performance, improved image quality for phase contrast as compared to attenuation contrast can be obtained and new exciting applications foreseen. gratings for x-ray phase contrast imaging," AIP Conf.
In this paper we present a reusable, chemically inert, multichannel Chip-to-World-Interface (CWI). The concept of this interface is based on a force fit connection similar to the hollow screw connectors known from high-performance liquid chromatography (HPLC) instruments. It allows contamination free connection of up to 100 thermoplastic tubes to microfluidic chips made from various materials e.g., epoxy polymers, glass and polydimethylsiloxane (PDMS). The spacing of the tubes is fixed whereas the outer dimensions of the CWI can be adapted to the microfluidic chip it should be used with. We demonstrate that such a CWI with 100 tubes is pressure-tight up to (at least) 630 kPa (6.3 bar) pressure and the connection easily sustains flow rates above 4 ml min(-1). The presented CWI is designed such that the fluid probed in the microfluidic chip is in direct contact only with the tube material and the material from which the microfluidic chip is made. This not only enables fluid transport without dead volume, it also ensures that CWI itself will not be contaminated or contaminate the samples being probed. Using polytetrafluoroethylene (PTFE, Teflon®) tubing we demonstrate that the CWI can even be used with harsh organic solvents such as dichloromethane or dimethylformamide during continuous solvent probing over several hours without damage to the CWI or leakage. This CWI therefore effectively allows using almost all types of organic solvents in microfluidic applications.
Grating based X-ray differential phase contrast imaging (DPCI) allows for high contrast imaging of materials with similar absorption characteristics. In the last years' publications, small animals or parts of the human body like breast, hand, joints or blood vessels have been studied. Larger objects could not be investigated due to the restricted field of view limited by the available grating area. In this paper, we report on a new stitching method to increase the grating area significantly: individual gratings are merged on a carrier substrate. Whereas the grating fabrication process is based on the LIGA technology (X-ray lithography and electroplating) different cutting and joining methods have been evaluated. First imaging results using a 2×2 stitched analyzer grating in a Talbot-Lau interferometer have been generated using a conventional polychromatic X-ray source. The image quality and analysis confirm the high potential of the stitching method to increase the field of view considerably.
Within the last decades more and more microfluidic systems for applications in chemistry, biology or medicine were developed. Most of them need a connection between the chip and its macroscopic environment e.g., pumps. Numerous concepts for such interconnections are known from literature but most of them allow only a small number of connections and are neither chemically inert nor contamination-free. We developed a chemically inert, reusable, multichannel Chipto-World-Interface (CWI) based on a force fit connection. This principle is comparable to hollow screws as used in highperformance liquid chromatography. The CWI can be used to connect chips, made of different materials, e.g., glass, polydimethylsiloxane (PDMS), or epoxy polymers, with up to 100 thermoplastic tubes. The dimensions of the CWI and the number of connections can be individually adapted depending on the chip dimensions but the pitch between the tubes is fixed. Due to the design of the CWI the fluid is only in contact with the chip and the tubing material, thus leading to a contamination free and zero dead volume interconnection. Using tubes of polytetrafluorethylene (PTFE, Teflon®) even enables probing with organic solvents like dimethylformamide, dichloromethane or tetrahydrofuran over several hours without leakage or corrosion of the CWI. During experiments the CWI with 100 connections resisted pressure up to 630 kPa (6.3 bar) and sustained flow rates higher than 4 ml/min.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.