ResumoO objetivo deste trabalho foi selecionar modelos alométricos para estimativa de altura, volume e afilamento do tronco de duas espécies florestais estabelecidas em um sistema silvipastoril com 10 anos de idade. Para a variável volume, foram testados modelos de simples e dupla entrada e para o afilamento do tronco foram testados modelos segmentados e não segmentados. Para estimativa da altura das árvores de eucalipto, foi selecionado o modelo semilogarítmico e para a acácia o modelo de melhor desempenho foi o exponencial. Abstract Height, volume and taper equations for eucalipt and acacia mangium established in a silvopastoralsystem. The objective of this work was to select allometric models for height, volume and taper estimation of two forestry species established in a ten years old silvopastoral system. Single (breast height diameter as the independent variable) and double entry (breast height diameter and total height as independent variables) models were evaluated for the volume estimation. We evaluated segmented and non-segmented models for the taper equations. The semilogaritmic model and the exponential model fitted better for the estimation of eucalyptus and acacia trees height, respectively. In general, the double entry volumetric models presented the best adjustments and Schumacher & Hall`s model presented slightly higher statistics among the models. In the case of taper models, we observed that the segmented models fitted better to the data for both species. Max & Burkhar´s model and the Parresol´s model were selected for eucalyptus trees and acacia trees, respectively. In general, all tested models fitted better to eucalyptus trees.
Resumo -O objetivo deste trabalho foi definir a melhor forma de uso do modelo de Clutter para estimar o crescimento e a produção de clones de eucalipto em sistemas de integração lavoura-pecuária-floresta. Foram utilizados dados de sistemas de integração localizados na região noroeste do Estado de Minas Gerais. Os dados foram originados a partir de 180 parcelas permanentes de inventário florestal contínuo, de 30x40 m, contendo três fileiras de dez árvores, com amostragem casual estratificada de intensidade de uma parcela para cada 10 ha. O número médio de árvores por hectare foi de 242. Foram avaliadas plantas com idades de 20 a 95 meses. As melhores relações funcionais foram obtidas a partir do uso do modelo original de Clutter, com base na significância e nos sinais esperados das estimativas de seus parâmetros. O ajuste do modelo de Clutter deve ser feito na sua forma completa.Termos para indexação: Eucalyptus, espaçamento, ILPF, índice de local, inventário florestal, sistemas agroflorestais. Clutter model in modeling growth and yield of eucalyptus in crop-livestock-forest integration systemsAbstract -The objective of this work was to define the best form of use of the Clutter model, in order to estimate growth and yield of eucalyptus clones in crop-livestock-forest integration systems. Data were collected from integration systems located in the northwest region of the state of Minas Gerais, Brazil. The data were originated from 180 continuous inventory permanent plots of 30x40 m, with three ten-plant rows and stratified random sampling of one plot per 10 ha. The average number of trees per hectare was 242. Plants with ages from 20 to 95 months were evaluated. The best functional relationships were obtained using the original Clutter model, based on the significance and on the expected signs of its estimated parameters. The Clutter model should be adjusted on its unreduced form.
ResumoO objetivo deste trabalho foi analisar a viabilidade econômica da produção de carvão vegetal em dois sistemas produtivos: oito fornos de superfície acoplados a uma fornalha para queima de gases e dez fornos do tipo "rabo-quente" sem sistema de queima de gases. Para análise econômica, definiu-se uma produção anual média igual a 1.571 metros cúbicos de carvão (mdc) e horizonte de planejamento de 12 anos, sendo propostos 2 cenários. No primeiro cenário, após a colheita da madeira, realiza-se o plantio de uma nova floresta, permanecendo o custo da madeira constante em todo o planejamento; no segundo cenário, após a colheita, considerou-se a condução da brotação, reduzindo os custos na 2ª rotação e consequentemente os custos da madeira. A análise econômica foi realizada através da determinação dos seguintes indicadores: Valor Presente Líquido (VPL), Valor Anual Equivalente (VAE), Razão Benefício/Custo (B/C) e Lucratividade. Os indicadores calculados demonstraram a viabilidade dos dois sistemas produtivos avaliados em ambos os cenários propostos, porém o sistema fornos-fornalha apresentou melhores valores para os indicadores. Conclui-se que a produção de carvão vegetal nos sistemas avaliados foram viáveis economicamente, com o sistema fornos-fornalha gerando maior lucro ao produtor de carvão. Palavras-chave: Fornos de alvenaria; análise determinística; valor presente líquido. AbstractEconomic viability of charcoal production in two production systems. The objective of this study was to analyze the economic viability of charcoal production in two conversion technologies: eight surface kilns coupled to a furnace for burning gases (kilns-furnace system) and ten "rabo-quente" or traditional charcoal kilns without burning gases system. An average annual production of 1571 cubic meters of charcoal (mdc) was used to perform the economic analysis. A planning horizon of 12 years and two scenarios were proposed. In the first scenario, after harvesting the wood, the planting of a new forest was performed, and the cost of wood remained constant throughout the planning horizon. In the second scenario, after the harvest, the conduction of shooting was considered, which reduced costs in the second rotation and consequently the cost of wood. The economic analysis was performed by determining the following indicators: Net Present Value (NPV), Equivalent Annual Value (EAV) and Benefit -Cost Reason (B/C). Calculated indicators demonstrated the viability of producing charcoal in the two production systems in both scenarios proposed, but kilns-furnace system presented better values. As conclusion, production of charcoal in the evaluated systems were economically viable. Kilns-furnace system was able to generate more profit to charcoal producer. Keywords: Kilns; deterministic analysis; net present value. INTRODUÇÃOO Brasil é o único país que produz carvão vegetal em larga escala para ser utilizado na indústria, destacando-se, então, como maior produtor e consumidor de carvão vegetal. Ressalte-se que o consumo do carvão vegetal está b...
RESUMO: Objetivou-se avaliar o desempenho de modelos estatísticos para predição da altura e volume de Tectona grandis em povoamentos localizados no município de São Francisco, mesorregião Nordeste do estado do Pará. Os dados para o ajuste dos modelos hipsométricos e volumétricos foram obtidos por meio de inventário florestal e cubagem rigorosa em povoamentos de origem seminal com dez (10) anos de idade em espaçamento 3 x 2 m. Foram mensurados o diâmetro com casca a 1,3 m de altura (dap) e altura total (h) de 47 indivíduos para ajuste das equações hipsométricas. Para obtenção dos volumes observados e ajuste dos modelos volumétricos foram cubadas 140 árvores. As equações de Stoffels e Shumacher e Hall respectivamente. As equações de Stoffels e Schumacher-Hall são recomendadas para auxiliar nos inventários florestais e estimativa do volume de madeira em povoamentos de Tectona Grandis na mesorregião Nordeste do Pará e regiões semelhantes. Palavras-chave: teca, inventário florestal, ajuste de equações.
RESUMOO objetivo deste trabalho foi analisar a viabilidade econômica da produção de carvão vegetal em sistema fornos-fornalha e fornos do tipo rabo-quente e realizar a simulação de risco de investimento. A análise econômica foi realizada pela determinação de Valor Presente Líquido (VPL), Valor Anual Equivalente (VAE) e Razão Benefício-Custo (B/C). A análise de risco foi realizada pelo método de Monte Carlo. O sistema fornos-fornalha apresentou maior viabilidade econômica. Os indicadores econômicos se mostraram viáveis e a análise de risco indicou probabilidade de os projetos serem inviáveis economicamente de 0,9% e 27,3% para o sistema fornos-fornalha e fornos rabo-quente, respectivamente. Conclui-se que a inclusão da análise de risco nas análises econômicas resulta em maior segurança para inferir sobre os indicadores econômicos.Palavras-chave: fornos de alvenaria, valor presente líquido, simulação de Monte Carlo. Economic Risk Analysis of Two Systems of Charcoal Production ABSTRACTThis study aimed to analyze the economic viability of charcoal production in kilns-furnace system and "rabo-quente" kilns, as well as the investment risk simulation. The economic analysis was performed by determining the following indicators: Net Present Value (NPV), Equivalent Annual Value (EAV) and Benefit -Cost Reason (B/C). The risk analysis was performed by the Monte Carlo method. Economic indicators were viable. Kilns-furnace system evidenced to be more viable economically. Risk analysis indicated that there is probability to economical unviability of evaluated systems, 0.9% and 27.3% for kilns-furnace system and "rabo-quente" kilns, respectively. Inclusion of risk analysis in economic analysis of charcoal production projects results in greater security to infer on economic indicators.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.