No abstract

Novel star-shaped trimeric surfactants consisting of three quaternary ammonium surfactants linked to a tris(2-aminoethyl)amine core were synthesized. Each ammonium had two methyls and a straight alkyl chain of 8, 10, 12, or 14 carbons. The adsorption and aggregation properties of these tris(N-alkyl-N,N-dimethyl-2-ammoniumethyl)amine bromides (3C(n)trisQ, in which n represents alkyl chain carbon number) were characterized by equilibrium and dynamic surface tension, rheology, small-angle neutron scattering (SANS), and cryogenic transmission electron microscopy (cryo-TEM) techniques. 3C(n)trisQ showed critical micelle concentrations (CMC) 1 order of magnitude lower than that of the corresponding gemini surfactants with an ethylene spacer and the corresponding monomeric surfactants. The logarithm of the CMC decreased linearly with increasing hydrocarbon chain length for 3C(n)trisQ. The slope of the line, which is well-known as Klevens equation, was larger than those of the monomeric and gemini surfactants; however, considering the total carbon number in the chains, the slope was shallower than the monomeric and was close to the gemini. Through the results such as surface tensions at the CMC (32-34 mN m(-1)) and the parameters of standard free energy, CMC/C(20) and pC(20), it was found that 3C(n)trisQ could adsorb densely at the air/water interface despite the strong electrostatic repulsion between multiple quaternary ammonium headgroups. Moreover, dynamic surface tension measurements showed that the kinetics of adsorption for 3C(n)trisQ to the air/water interface was slow because of their bulky structures. Furthermore, the results of rheology, SANS, and cryo-TEM determined that 3C(n)trisQ with n = 10 and 12 formed ellipsoidal micelles at low concentrations in solution and the structures transformed to threadlike micelles with very few branches for n = 12 as the concentration increased, but for n = 14 threadlike micelles formed at relatively low concentrations.

The structure of solid polymer electrode and catalyst ink of fuel cell has been investigated by focusing‐ (FSANS) and contrast‐variation small‐angle neutron scattering (CV‐SANS). The solid polymer electrode, consisting of carbon (C), platinum, and ionomer (polymer, P), exhibited a power‐law function with two asymptotes, i.e., from I(q) ∼ q−1 to I(q) ∼ q−4 with a crossover around q ≈ 0.005 Å−1. The scattering functions of the catalyst ink, i.e., the polymer electrodes dispersed in water, were successfully decomposed to the corresponding partial structure factors, SCC(q), SPP(q), SCP(q), exclusively representing C‐C, P‐P, and C‐P correlations. SCC(q) was a monotonic decreasing function of q, dominating in the scattering from carbon clusters. On the other hand, SPP(q) exhibited a scattering maximum characteristic of polyelectrolyte solutions. This suggests that ionic clusters in polyelectrolyte solutions are formed in catalyst ink. The cross term, SCP(q), indicated that the carbon scattering is dominant and significant amount of ionomer is adsorbed on the carbon agglomerates. It is concluded that the catalyst ink consists of carbon agglomerates surrounded by ionomers and the presence of ionic‐cluster path plays a key role in the performance of the solid polymer electrodes in polymer electrolyte fuel cells. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 39842.

Shear-induced thickening/thinning phenomena of aqueous rodlike micellar solutions of cetyltrimethylammonium bromide (CTAB) and sodium p-toluene sulfonate (NapTS) were investigated by means of simultaneous measurements of rheology and small-angle neutron scattering (SANS), the so-called Rheo-SANS. The aqueous CTAB/NapTS solutions were classified into five different categories dependent on their flow behavior and micellar structure. By increasing salt concentration and/or shear rates, the micelles underwent morphological transition from (i) spherical or short rodlike micelles to (ii) long rodlike micelles without entanglements, followed by (iii) those with entanglements. These transitions were recognized as changes in flow behavior from Newtonian to shear-thickening and shear-thinning flow, respectively. In the latter two cases, anisotropic SANS patterns appeared around these critical shear rates. The physical meaning of the anisotropic SANS patterns accompanied by shear-thickening flow behavior is discussed in conjunction with other shear-thickening systems.

We investigated the growth mechanisms of wormlike micelles formed by star-type trimeric surfactant (3C(12)trisQ) with a hydrocarbon chain length of 12 in an aqueous solution. A 3C(n)trisQ molecule consists of three hydrocarbon chains and three hydrophilic groups connected by spacer chains, where n is the carbon number in the hydrocarbon chain. Our recent studies showed that the aggregates formed by 3C(12)trisQ exhibited sphere-to-rod transition and the growth of wormlike micelles in an aqueous solution in the absence of salt. We performed small-angle neutron scattering (SANS) and rheological measurements and investigated the aggregation behavior of 3C(12)trisQ with various surfactant volume fractions. All SANS profiles for the 3C(12)trisQ indicated peak-profiles in the q range of 0.02 Å(-1) < q < 0.05 Å(-1), where the magnitude of the scattering vector q is defined by q = 4π sin(θ/2)/λ (λ and θ represent the wavelength and scattering angle, respectively). These peaks were attributed to repulsive interparticle interactions between the micelles. The volume fraction dependence of the SANS peak-position was in agreement with the rheological behavior. These results suggest that 3C(12)trisQ shows sphere-to-rod transition and can produce wormlike micelles in the absence of salt. To determine the structural parameters quantitatively, model-fitting analysis was performed using a charged cylindrical or charged ellipsoidal particle scattering function. The radius, length, and number of water molecules per surfactant molecule (n(w)) inside the micelles were evaluated. The length increased and the n(w) value decreased with increasing φ, indicating that the growth of a wormlike micelle accompanies the extrusion of water from the micelle. The end-cap energies of star-type trimeric, gemini, and monomeric surfactants were evaluated from φ dependence of zero-shear viscosity. We found that wormlike micelles formed by 3C(12)trisQ exhibited a higher end-cap energy than gemini surfactant.