Recent improvements in machine vision algorithms have led to closed-circuit television (CCTV) cameras emerging as an important data source for determining of the state of traffic congestion. In this study we used two different deep learning techniques, you only look once (YOLO) and deep convolution neural network (DCNN), to detect traffic congestion from camera images. The support vector machine (SVM), a shallow algorithm, was also used as a comparison to determine the improvements obtained using deep learning algorithms. Occupancy data from nearby radar sensors were used to label congested images in the dataset and for training the models. YOLO and DCCN achieved 91.5% and 90.2% accuracy, respectively, whereas SVM's accuracy was 85.2%. Receiver operating characteristic curves were used to determine the sensitivity of the models with regard to different camera configurations, light conditions, and so forth. Although poor camera conditions at night affected the accuracy of the models, the areas under the curve from the deep models were found to be greater than 0.9 for all conditions. This shows that the models can perform well in challenging conditions as well. Disciplines Disciplines Transportation Engineering Comments Comments This is a manuscript of an article published as Chakraborty,

Many existing traffic signal controllers are either simple adaptive controllers based on sensors placed around traffic intersections, or optimized by traffic engineers on a fixed schedule. Optimizing traffic controllers is time consuming and usually require experienced traffic engineers. Recent research has demonstrated the potential of using deep reinforcement learning (DRL) in this context. However, most of the studies do not consider realistic settings that could seamlessly transition into deployment. In this paper, we propose a DRL-based adaptive traffic signal control framework that explicitly considers realistic traffic scenarios, sensors, and physical constraints. In this framework, we also propose a novel reward function that shows significantly improved traffic performance compared to the typical baseline pre-timed and fully-actuated traffic signals controllers. The framework is implemented and validated on a simulation platform emulating real-life traffic scenarios and sensor data streams.

Construction activities typically create large amounts of ground disturbance, which can lead to increased rates of soil erosion. Construction stormwater practices are used on active jobsites to protect downstream waterbodies from offsite sediment transport. Federal and state regulations require routine pollution prevention inspections to ensure that temporary stormwater practices are in place and performing as intended. This study addresses the existing challenges and limitations in the construction stormwater inspections and presents a unique approach for performing unmanned aerial system (UAS)-based inspections. Deep learning-based object detection principles were applied to identify and locate practices installed on active construction sites. The system integrates a post-processing stage by clustering results. The developed framework consists of data preparation with aerial inspections, model training, validation of the model, and testing for accuracy. The developed model was created from 800 aerial images and was used to detect four different types of construction stormwater practices at 100% accuracy on the Mean Average Precision (MAP) with minimal false positive detections. Results indicate that object detection could be implemented on UAS-acquired imagery as a novel approach to construction stormwater inspections and provide accurate results for site plan comparisons by rapidly detecting the quantity and location of field-installed stormwater practices.

Automated traffic signal performance measures (ATSPMs) are an effort to equip traffic signal controllers with high-resolution data-logging capabilities and utilize this data to generate performance measures. These measures allow practitioners to improve operations as well as to maintain and operate their systems in a safe and efficient manner. Although these measures have changed the way that operators manage their systems, several shortcomings of the tool, identified by talking with signal operators, are a lack of data quality control and the extent of resources required to properly use the tool for system-wide management. To address these shortcomings, intelligent traffic signal performance measurements (ITSPMs) are presented in this paper, using the concepts of machine learning, traffic flow theory, and data visualization to reduce the operator resources needed for overseeing data-driven traffic signal management systems. In applying these concepts, ITSPMs provide graphical tools to identify and remove logging errors and data from bad sensors, intelligently determine trends in demand, and address the question of whether or not coordination may be needed at an intersection. The focus of ATSPMs and ITSPMs on performance measures for multimodal users is identified as a pressing need for future research.