Using automated laser-Doppler methods we have identified four distinct sequences of instabilities leading to turbulent convection at low Prandtl number (2.5-5.0), in fluid layers of small horizontal extent. Contour maps of the structure of the time-averaged velocity field, in conjunction with high-resolution power spectral analysis, demonstrate that several mean flows are stable over a, wide range in the Rayleigh number R, and that the sequence of time-dependent instabilities depends on the mean flow. A number of routes to non-periodic motion have been identified by varying the geometrical aspect ratio, Prandtl number, and mean flow. Quasi-periodic motion at two frequencies leads to phase locking or entrainment, as identified by a step in a graph of the ratio of the two frequencies. The onset of non-periodicity in this case is associated with the loss of entrainment as R is increased. Another route to turbulence involves successive subharmonic (or period doubling) bifurcations of a periodic flow. A third route contains a well-defined regime with three generally incommensurate frequencies and no broadband noise. The spectral analysis used to demonstrate the presence of three frequencies has a precision of about one part in lo4 to lo5. Finally, we observe a process of intermittent non-periodicity first identified by Libchaber & Maurer a t lower Prandtl number. In this case the fluid alternates between quasi-periodic and nonperiodic states over a finite range in R. Several of these processes are alsomanifested by rather simple mathematical models, but the complicated dependence on geometrical parameters, Prandtl number, and mean flow structure has not been explained.

Jefferson Laboratory's kW-level infrared free-electron laser utilizes a superconducting accelerator that recovers about 75% of the electron-beam power. In achieving first lasing, the accelerator operated "straight ahead" to deliver 38-MeV, 1.1-mA cw current for lasing near 5 &mgr;m. The waste beam was sent directly to a dump while producing stable operation at up to 311 W. Utilizing the recirculation loop to send the electron beam back to the linac for energy recovery, the machine has now recovered cw average currents up to 5 mA, and has lased cw with up to 1720 W output at 3.1 &mgr;m.

No abstract

A new THz/IR/UV photon source at Jefferson Lab is the first of a new generation of light sources based on an Energy-Recovered, (superconducting) Linac (ERL). The machine has a 160 MeV electron beam and an average current of 10 mA in 75 MHz repetition rate hundred femtosecond bunches.These electron bunches pass through a magnetic chicane and therefore emit synchrotron radiation. For wavelengths longer than the electron bunch the electrons radiate coherently a broadband THz $ half cycle pulse whose average brightness is 45 orders of magnitude higher than synchrotron IR sources. Previous measurements showed 20 W of average power extracted [Carr, et al., Nature 420 (2002) 153]. The new facility offers simultaneous synchrotron light from the visible through the FIR along with broadband THz production of 100 fs pulses with 4200 W of average power.The FELs also provide record-breaking laser power [Neil, et al., Phys. Rev. Lett. 84 (2000) 662]: up to 10 kW of average power in the IR from 1 to 14 mm in 400 fs pulses at up to 74.85 MHz repetition rates and soon will produce similar pulses of 300-1000 nm light at up to 3 kW of average power from the UV FEL. These ultrashort pulses are ideal for maximizing the interaction with material surfaces. The optical beams are Gaussian with nearly perfect beam quality. See www.jlab.org/FEL for details of the operating characteristics; a wide variety of pulse train configurations are feasible from 10 ms long at high repetition rates to continuous operation.The THz and IR system has been commissioned. The UV system is to follow in 2005. The light is transported to user laboratories for basic and applied research. Additional lasers synchronized to the FEL are also available. Past activities have included production of carbon nanotubes, studies of vibrational relaxation of interstitial hydrogen in silicon, pulsed laser deposition and ablation, nitriding of metals, and energy flow in proteins. This paper will present the status of the system and discuss some of the discoveries we have made concerning the physics performance, design optimization, and operational limitations of such a first generation high power ERL light source. r