Crack patterns in desiccating clay suspensions are drastically altered by the addition of polymers. In this paper we report a systematic study of the effect of varying the composition of a clay-polymer composite on the formation of crack patterns. Experiments as well as computer simulations have been done. Details of the morphology and fractal dimension of the experimental patterns are observed and the simulation is done on a two-dimensional spring network model. We find a transition from a completely fragmented fractal pattern at high clay content to a continuous film at about 50% clay content. The results of the simulation are in good qualitative agreement with the experiments. The study is expected to be of importance for clay-polymer composites. These can be designed to give improved mechanical and electrical properties for practical applications.

No abstract

The use of sustainable, green and biodegradable natural wastes for Cr(VI) detoxification from the contaminated wastewater is considered as a challenging issue. The present research is aimed to assess the effectiveness of seven different natural biomaterials, such as jackfruit leaf, mango leaf, onion peel, garlic peel, bamboo leaf, acid treated rubber leaf and coconut shell powder, for Cr(VI) eradication from aqueous solution by biosorption process. Characterizations were conducted using SEM, BET and FTIR spectroscopy. The effects of operating parameters, viz., pH, initial Cr(VI) ion concentration, adsorbent dosages, contact time and temperature on metal removal efficiency, were studied. The biosorption mechanism was described by the pseudo-second-order model and Langmuir isotherm model. The biosorption process was exothermic, spontaneous and chemical (except garlic peel) in nature. The sequence of adsorption capacity was mango leaf > jackfruit leaf > acid treated rubber leaf > onion peel > bamboo leaf > garlic peel > coconut shell with maximum Langmuir adsorption capacity of 35.7 mg g for mango leaf. The treated effluent can be reused. Desorption study suggested effective reuse of the adsorbents up to three cycles, and safe disposal method of the used adsorbents suggested biodegradability and sustainability of the process by reapplication of the spent adsorbent and ultimately leading towards zero wastages. The performances of the adsorbents were verified with wastewater from electroplating industry. The scale-up study reported for industrial applications. ANN modelling using multilayer perception with gradient descent (GD) and Levenberg-Marquart (LM) algorithm had been successfully used for prediction of Cr(VI) removal efficiency. The study explores the undiscovered potential of the natural waste materials for sustainable existence of small and medium sector industries, especially in the third world countries by protecting the environment by eco-innovation.

No abstract

We study squeeze flow of two different fluids (castor oil and ethylene glycol) between a pair of glass plates and a pair of perspex plates, under an applied load. The film thickness is found to vary with time as a power-law, where the exponent increases with load. After a certain time interval the area of fluid-solid contact saturates to a constant value. This saturation area, increases with load at different rates for different fluid-solid combinations.