Graphical abstract

The production and surface modification of cellulose nanocrystals (CNC) from Agave tequilana Weber waste (ATW) and their effect on the melt rheology of PLA were investigated. For that, CNC were obtained from ATW residues by acid hydrolysis and grafted with 2-ethyl hexyl acrylate (2-EHA) to promote compatibility with nonpolar polymers, such as PLA. The morphology of CNC occurred as rods, spheres, and the so-called porous network observed by scanning electron microscopy (SEM) and electron transmission microscopy (TEM), and the crystallinity of the cellulose fibers was ~73% and increased up to ~94% for CNC followed by X-ray diffraction (XRD). The acid hydrolysis and alkali extraction process produce changes on the native cellulose type I from ATW bagasse resulting in a mixture of cellulose type I and II and was preserved after CNC isolation and surface grafting. Polymer grafting was assessed using Fourier-transform infrared spectroscopy (FTIR) and X-ray electron spectroscopy (XPS). Upon surface modification, the grafted CNC presented better thermal stability than CNC pristine evaluated by thermogravimetric analysis (TGA), and the surface energy of the CNC was decreased which could promote CNC dispersion within polymers. Both pristine and surface modified CNC were melt mixed with PLA to produce nanocomposites at different concentrations of CNC. Dynamic time sweep tests showed that the introduction of CNC and CNC/2-EHA decreased the complex viscosity of PLA due to polymer degradation during compounding.

Brosimum alicastrum is a native tree widely distributed in the Yucatan peninsula where is called Ramon. Some studies have reported that Ramon seeds contain high starch content, recently used in developing novel and sustainable biomaterials. This work aimed to evaluate the effect of the extractive solution on the starch isolation Ramon seed flour; for that, distilled water (S1) and NaOH solution (S2) were used. The Ramon starch yield was 28.0 ± 1.4% and 31.9 ± 1.7% for S1 and S2. The morphology of starches was observed with scanning electronic microscopy, the functional groups were determined through Fourier-transform Infrared Spectroscopy and crystallinity was calculated by X-ray diffraction analysis. The results indicate that both types of starch presented spherical morphology, similar functional groups and crystallinity values, suggesting that both extraction methods are suitable. The starches isolated exhibited similar thermal behavior assessed by differential scanning calorimetry and thermogravimetric analysis.

Agro-industrial waste valorization is an attractive approach that offers new alternatives to deal with shrinkage and residue problems. One of these approaches is the synthesis of advanced carbon materials. Current research has shown that citrus waste, mainly orange peel, can be a precursor for the synthesis of high-quality carbon materials for chemical adsorption and energy storage applications. A recent approach to the utilization of advanced carbon materials based on lignocellulosic biomass is their use in solar absorber coatings for solar-thermal applications. This study focused on the production of biochar from Citrus aurantium orange peel by a pyrolysis process at different temperatures. Biochars were characterized by SEM, elemental analysis, TGA-DSC, FTIR, DRX, Raman, and XPS spectroscopies. Optical properties such as diffuse reflectance in the UV−VIS−NIR region was also determined. Physical-chemical characterization revealed that the pyrolysis temperature had a negative effect in yield of biochars, whereas biochars with a higher carbon content, aromaticity, thermal stability, and structural order were produced as the temperature increased. Diffuse reflectance measurements revealed that it is possible to reduce the reflectance of the material by controlling its pyrolysis temperature, producing a material with physicochemical and optical properties that could be attractive for use as a pigment in solar absorber coatings.

No abstract