Ionic liquids (ILs) are used as ultrathin films in many applications. We studied the nanoscale arrangement within the first layer of 1,3-dimethylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([C 1 C 1 Im] [Tf 2 N]) on Au(111) between 400 and 110 K in ultrahigh vacuum by scanning tunneling and noncontact atomic force microscopy with molecular resolution. Compared to earlier studies on similar ILs, a different behavior is observed, which we attribute to the small size and symmetrical shape of the cation: (a) In both AFM and STM only the anions are imaged; (b) only long-range-ordered but no amorphous phases are observed; (c) the hexagonal room-temperature phase melts 30–50 K above the IL’s bulk melting point; (d) at 110 K, striped and hexagonal superstructures with two and three ion pairs per unit cell, respectively, are found. AFM turned out to be more stable at higher temperature, while STM revealed more details at low temperature.

Indicators for H2 are crucial to ensure safety standards in a green hydrogen economy. Herein, the authors report micron‐scaled indicator supraparticles for real‐time monitoring and irreversible recording of H2 gas via a rapid eye‐readable two‐step color change. They are produced via spray‐drying SiO2 nanoparticles, AuPd nanoparticles, and indicator‐dye resazurin. The resulting gas‐accessible mesoporous supraparticle framework absorbs water from humid atmospheres to create a three‐phase‐system. In the presence of H2, the color of the supraparticle switches first irreversibly from purple to pink and further reversibly to a colorless state. In situ infrared spectroscopy measurements indicate that this color change originates from the (ir)reversible H2‐induced reduction of resazurin to resorufin and hydroresorufin. Further infrared spectroscopic measurements and molecular dynamics simulations elucidate that key to achieve this functionality is an established three‐phase‐system within the supraparticles, granting molecular mobility of resazurin. Water acts as transport medium to carry resazurin molecules towards the catalytically active AuPd nanoparticles. The advantages of the supraparticles are their small dimensions, affordable and scalable production, fast response times, straightforward bare‐eye detection, and the possibility of simultaneously monitoring H2 exposure in real‐time and ex post. Therefore, H2 indicator supraparticles are an attractive safety additive for leakage detection and localization in a H2 economy.

In order to move from a carbon-based energy system to a more sustainable one, focus is put on liquid organic hydrogen carrier (LOHC) systems for CO 2 -free hydrogen storage and release. In this study sulfur as a dopant for the Pt/TiO 2 catalyst was identified to be a selective poison resulting in high performing catalysts in the dehydrogenation experiments with the LOHC system perhydro dibenzyltoluene/dibenzyltoluene (H18-DBT/H0-DBT). The Pt/TiO 2 and S−Pt/TiO 2 catalysts were compared to the current benchmarks Pt/γ-Al 2 O 3 and S−Pt/γ-Al 2 O 3 . S−Pt/TiO 2 was found to achieve a high degree of dehydrogenation of 98% which is competitive to the benchmark S−Pt/γ-Al 2 O 3 . In addition, analyses of the side products resulted in a higher selectivity toward dibenzyltoluene for S−Pt/TiO 2 than for the γ-Al 2 O 3 supported catalysts. Characterization with infrared spectroscopy (IR), transmission electron microscopy (TEM), and diffuse reflectance infrared Fourier transform spectroscopy with CO as adsorbing molecule (CO−DRIFTS) suggest the presence of strongly chemisorbed sulfur species as well as SMSI effects of the Pt/TiO 2 catalysts. Based on kinetic studies, a batch and plug flow reactor for the dehydrogenation reaction were simulated for both titania supported catalysts. According to the calculations, the sulfur doped catalyst displays higher conversions in both batch and plug flow operation as compared to the unmodified system Pt/TiO 2 .

Solid catalysts with ionic liquid layers (SCILLs) show improved performance as compared to ionic liquid (IL)-free catalysts. To realize the beneficial IL-induced modification, the IL layer should be stable under reaction conditions but also permeable for gaseous reactants entering through the IL phase. Herein, we applied (polarization modulation-) infrared reflection absorption spectroscopy ((PM-)­IRAS) to investigate the CO permeability of model SCILL systems. We investigated three different IL model systems prepared by physical vapor deposition (PVD) in ultrahigh vacuum (UHV) on atomically clean Pt(111), namely, 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)­imide ([C4C1Pyr]­[NTf2]), 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)­imide ([C2C1Im]­[NTf2]), and 1-butyl-1-methylpyrrolidinium trifluoromethanesulfonate ([C4C1Pyr]­[OTf]). The adsorption geometries of the anions depend on the surface structure, IL coverage, and precoverage of CO. At room temperature, IL multilayers of randomly oriented species grow on top of strongly adsorbed wetting layers. Upon heating, a partial wetting transition induces the coexistence of an IL wetting monolayer film with three-dimensional droplets. Gas-phase CO does not permeate through IL multilayers, while it penetrates the IL wetting monolayer leading to mixed IL/CO films. The partial dewetting transition and the permeability differ drastically with the temperature and IL. Consequently, the morphology of the IL films could be a factor that determines the catalytic behavior of SCILLs to a significant extent.

We investigated growth and temperature stability of Pt nanoclusters from 1 to 50 atoms on h-BN/Rh(111) using high-resolution XPS and STM.