We demonstrate experimentally that arrays of base-tapered InP nanowires on top of an InP substrate form a broad band and omnidirectional absorbing medium. These characteristics are due to the specific geometry of the nanowires. Almost perfect absorption of light (higher than 97%) occurs in the system. We describe the strong optical absorption by finite-difference time-domain simulations and present the first study of the influence of the geometry of the nanowires on the enhancement of the optical absorption by arrays. Cylindrical nanowires present the highest absorption normalized to the volume fraction of the semiconductor. The absolute absorption in layers of conical nanowires is higher than that in cylindrical nanowires but requires a larger volume fraction of semiconducting material. Base-tapered nanowires, with a cylindrical top and a conical base, represent an intermediate geometry. These results set the basis for an optimized optical design of nanowire solar cells.

A broad‐band and omnidirectional antireflection coating consisting of semiconductor nanowires is fabricated. The reflection is reduced due to a graded refractive index, which is achieved by a certain nanorod‐length distribution of cylindrical and conically shaped rods. An increased transmission and, accordingly, a reduced reflection are demonstrated for the visible and near‐infrared parts of the spectrum.

Colloidal quantum dots have emerged as a material platform for low-cost high-performance optoelectronics. At the heart of optoelectronic devices lies the formation of a junction, which requires the intimate contact of n-type and p-type semiconductors. Doping in bulk semiconductors has been largely deployed for many decades, yet electronically active doping in quantum dots has remained a challenge and the demonstration of robust functional optoelectronic devices had thus far been elusive. Here we report an optoelectronic device, a quantum dot homojunction solar cell, based on heterovalent cation substitution. We used PbS quantum dots as a reference material, which is a p-type semiconductor, and we employed Bi-doping to transform it into an n-type semiconductor. We then combined the two layers into a homojunction device operating as a solar cell robustly under ambient air conditions with power conversion efficiency of 2.7%.