No abstract

We present a new approach to dielectric metasurface design that relies on a single resonator per unit cell and produces robust, high quality-factor Fano resonances. Our approach utilizes symmetry breaking of highly symmetric resonator geometries, such as cubes, to induce couplings between the otherwise orthogonal resonator modes. In particular, we design perturbations that couple "bright" dipole modes to "dark" dipole modes whose radiative decay is suppressed by local field effects in the array. Our approach is widely scalable from the near-infrared to radio frequencies. We first unravel the Fano resonance behavior through numerical simulations of a germanium resonator-based metasurface that achieves a quality-factor of ~1300 at ~10.8 µm. Then, we present two experimental demonstrations operating in the near-infrared (~1 µm): a silicon-based implementation that achieves a quality-factor of ~350; and a gallium arsenide-based structure that achieves a quality-factor of ~600 -the highest near-infrared quality-factor experimentally demonstrated to date with this kind of metasurfaces. Importantly, large electromagnetic field enhancements appear within the resonators at the Fano resonant frequencies. We envision that combining high quality-factor, high field enhancement resonances with nonlinear and active/gain materials such as gallium arsenide will lead to new classes of active optical devices.Metasurfaces are currently the subject of intensive research worldwide since they can be tailored to produce a wide range of optical behaviors. However, metasurfaces generally exhibit broad spectral resonances, and it is difficult to obtain narrow (i.e. high quality-factor, Q) spectral features. Attaining such high-Q features from metasurfaces would greatly expand their application space, particularly in the areas of sensing, spectral filtering, and optical modulation. Early metasurfaces were fabricated from metals and exhibited particularly broad resonances at infrared and optical frequencies as a result of Ohmic losses. Dielectric resonator-based metasurfaces were introduced to overcome these losses and have enabled, among others, wave-front manipulation and cloaking devices, perfect reflectors, and ultrathin lenses [1-10] but, although absorptive losses were reduced, the metasurface resonances remained broad due to strong coupling with the external field (i.e. large radiation losses).Recently, new strategies based on "electromagnetically induced transparency" or "Fano resonances" have been developed that show great promise for achieving high-Q resonances [11][12][13][14][15]. In this approach, the resonator system is designed to support both "bright" and "dark" resonances. The incident optical field readily couples to the bright resonance, but cannot couple directly to the dark resonance. Through proper design, a weak coupling between the two resonances can be introduced, allowing energy from the incident wave to be indirectly coupled to the dark resonance. The metasurface transmission and reflection spectra resulting from ...

The reflection of an optical wave from a metal, arising from strong interactions between the optical electric field and the free carriers of the metal, is accompanied by a phase reversal of the reflected electric field. A far less common route to achieve high reflectivity exploits strong interactions between the material and the optical magnetic field to produce a "magnetic mirror" which does not reverse the phase of the reflected electric field. At optical frequencies, the magnetic properties required for strong interaction can only be achieved through the use of artificially tailored materials. Here we experimentally demonstrate, for the first time, the magnetic mirror behavior of a low-loss, all-dielectric metasurface at infrared optical frequencies through direct measurements of the phase and amplitude of the reflected optical wave. The enhanced absorption and emission of transverse electric dipoles placed very close to magnetic mirrors can lead to exciting new advances in sensors, photodetectors, and light sources. 2Magnetic mirrors or high impedance surfaces were first proposed at microwave frequencies 1 . An important advantage of these mirrors is that a transverse electric dipole placed close to the mirror surface is located at an antinode of the total (incident plus reflected) electric field and, hence, can absorb and emit efficiently 2 . In contrast, a dipole placed close to a metal surface experiences a node of the total electric field and can neither absorb nor emit efficiently. At microwave frequencies these exceptional properties of magnetic mirrors have been utilized for smaller, more efficient antennas and circuits [3][4][5][6] . Magnetic mirrors can also exhibit unusual behavior in the far-field, through the appearance of a "magnetic Brewster's angle" at which the reflection of an s-polarized wave vanishes 7,8 .At optical frequencies, magnetic behavior can only be achieved through the use of artificially tailored materials and, as a result, relatively little work on optical frequency magnetic mirrors has been reported thus far. Recent investigations of magnetic mirror behavior at optical frequencies have utilized metallic structures such as fish-scale structures 9 and gold-capped carbon nanotubes 10 . However, the metals utilized in these approaches suffer from high intrinsic Ohmic losses at optical frequencies. Alldielectric metamaterials, based upon subwavelength resonators, with much lower optical losses and isotropic optical response have been used to demonstrate fascinating properties in a number of recent investigations [11][12][13][14][15][16][17][18][19][20][21][22][23][24][25] . In another recent work, magnetic mirror behavior was theoretically predicted for silicon dielectric resonators in the near infrared 26 . Although the reflection amplitude spectrum was measured in this work, no experimental phase measurements were achieved. In principle, this work is the same as our previous work 12 that only showed high reflectivity at the magnetic dipole resonance, which is a necessary but not...

Pseudospin, an additional degree of freedom inherent in graphene, plays a key role in understanding many fundamental phenomena such as the anomalous quantum Hall effect, electron chirality and Klein paradox. Unlike the electron spin, the pseudospin was traditionally considered as an unmeasurable quantity, immune to Stern-Gerlach-type experiments. Recently, however, it has been suggested that graphene pseudospin is a real angular momentum that might manifest itself as an observable quantity, but so far direct tests of such a momentum remained unfruitful. Here, by selective excitation of two sublattices of an artificial photonic graphene, we demonstrate pseudospin-mediated vortex generation and topological charge flipping in otherwise uniform optical beams with Bloch momentum traversing through the Dirac points. Corroborated by numerical solutions of the linear massless Dirac-Weyl equation, we show that pseudospin can turn into orbital angular momentum completely, thus upholding the belief that pseudospin is not merely for theoretical elegance but rather physically measurable.