Atomically thin molybdenum disulfide (MoS2) shows great potential for use in nanodevices because of its remarkable electronic, optoelectronic, and mechanical properties. These material properties are often dependent on the thickness or the number of layers, and hence Raman spectroscopy is widely used to characterize the thickness of atomically thin MoS2 due to the sensitivity of the vibrational spectrum to thickness. However, the lasers used in Raman spectroscopy can increase the local surface temperature and eventually damage the upper layers of the MoS2, thereby changing the aforementioned material properties. In this work, the effects of lasers on the topography and material properties of atomically thin MoS2 were systematically investigated using Raman spectroscopy and atomic force microscopy. In detail, friction force microscopy was used to study the friction characteristics of atomically thin MoS2 as a function of laser powers from 0.5 to 20 mW and number of layers from 1 to 3. It was found that particles formed on the top surface of the atomically thin MoS2 due to laser-induced thermal effects. The degree of particle formation increased as the laser power increased, prior to the thinning of the atomically thin MoS2. In addition, the degree of particle formation increased as the number of MoS2 layers increased, which suggests that the thermal behavior of the supported MoS2 may differ depending on the number of layers. The particles likely originated from the atmosphere due to laser-induced heating, but could be eliminated via appropriate laser powers and exposure times, which were determined experimentally. The outcomes of this work indicate that thermal management is crucial in the design of reliable nanoscale devices based on atomically thin MoS2.
This study proposes a novel skinny button with multimodal audio and haptic feedback to enhance the touch user interface of electronic devices. The active material in the film-type actuator is relaxor ferroelectric polymer (RFP) poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) [P(VDF-TrFE-CFE)] blended with poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)], which produces mechanical vibrations via the fretting vibration phenomenon. Normal pressure applied by a human fingertip on the film-type skinny button mechanically activates the locally concentrated electric field under the contact area, thereby producing a large electrostrictive strain in the blended RFP film. Multimodal audio and haptic feedback is obtained by simultaneously applying various electric signals to the pairs of ribbon-shaped top and bottom electrodes. The fretting vibration provides tactile feedback at frequencies of 50–300 Hz and audible sounds at higher frequencies of 500 Hz to 1 kHz through a simple on-off mechanism. The advantage of the proposed audio-tactile skinny button is that it restores the “click” sensation to the popular virtual touch buttons employed in contemporary electronic devices.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.