The design of hypersonic airbreathing vehicles is a challenging objective due to the intrinsic complexity of propulsion-airframe integration in combination with an engine cycle design able to operate over a wide Mach number range. This is one of the objectives of EC co-funded project LAPCAT-II aiming to reduce antipodal flights to less than 2 to 4 hours. Among the several studied vehicles in the preceding project LAPCAT-I, only aircraft designs for Mach 5 and 8 flights were retained in the present project. Starting from the available Mach 5 vehicle and its related pre-cooled turbo-ramjet, assumed performance figures of different components were now assessed in more detail numerically and experimentally. Though the cruise flight of the Mach 8 vehicle based on a scramjet seemed feasible, further refinement was needed. In support to the integrated vehicle design, dedicated aerodynamic and propulsive experiments were done for the different components as well as for the complete vehicle. This included also the mutual verification of the windtunnels within Europe. In parallel, modelling implementation and validation on high-speed aerodynamics and propulsion were performed. The validated tools gave confidence to assess the performances of the fully integrated vehicles to comply with the mission goals. Finally, the impact of the emissions onto the climate was evaluated. Nomenclature

HAL is a multi-disciplinary open access archive for the deposit and dissemination of scientific research documents, whether they are published or not. The documents may come from teaching and research institutions in France or abroad, or from public or private research centers. L'archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des établissements d'enseignement et de recherche français ou étrangers, des laboratoires publics ou privés.

To face the increasing environmental footprint of commercial aviation, industrial and research efforts have been focusing on exploring unconventional configurations and new propulsion paradigms, mostly based on electric technology. Such explorations require Overall Aircraft Design that has to be performed in an integrated multidisciplinary design environment. Such design environments are often limited to multidisciplinary analysis, adapted for a single aircraft configuration or require an important effort to be mastered. FAST-OAD is a software program developed by ONERA and ISAE-SUPAERO for aircraft sizing analysis and optimization that aims at user friendliness and modularity. It is an aircraft sizing code based on multidisciplinary design optimization techniques and the point mass approach to estimate the required fuel and energy consumption for a given set of TLARs. This paper presents the motivations for moving from the original software program, called FAST, to the open source code FAST-OAD based on OpenMDAO.

No abstract

No abstract