Renewable Energy Sources (RES) showed enormous growth in the last few years. In comparison with the other RES, solar power has become the most feasible source because of its unique properties such as clean, noiseless, eco-friendly nature, etc. During the extraction of electric power, the DC–DC converters were given the prominent interest because of their extensive use in various applications. Photovoltaic (PV) systems generally suffer from less energy conversion efficiency along with improper stability and intermittent properties. Hence, there is a necessity of the Maximum power point tracking (MPPT) algorithm to ensure the maximum power available that can be harnessed from the solar PV. In this paper, the most important features of the DC/DC converters along with the MPPT techniques are reviewed and analyzed. A detailed comprehensive analysis is made on different converter topologies of both non-isolated and isolated DC/DC converters. Then, the modulation strategies, comparative performance evaluation are addressed systematically. At the end, recent advances and future trends are described briefly and considered for the next-generation converter’s design and applications. This review work will provide a useful structure and reference point on the DC/DC converters for researchers and designers working in the field of solar PV applications.

No abstract

Heat transfer through building opaque envelope is responsible for approximately half of the total heat loss and gain to and from the surroundings. Therefore, insulation materials are commonly used in the building envelope to reduce the heat transfer. Recently, lightweight wall materials with lower thermal conductivity are used in construction along with the commonly used materials such as heavy concrete and earthen materials. In this perspective, there is a need to understand the optimum insulation thickness for different types of building construction materials to minimize unnecessary usage of insulation materials. This study investigated the optimum insulation thickness for different construction materials following a life-cycle approach, where an analytical optimization methodology based on the degree-days method and life-cycle cost analysis was used. In total, 4 insulation materials and 15 building construction materials were considered in the optimization study. The objective function was to minimize life-cycle cost corresponding to the decision variables including insulation thickness and the thermal conductivity of insulation and wall materials. The results showed that the use of insulation in lightweight wall materials is not economically feasible because of their negligible cost-saving potential (below US$2.5/m2-year). However, the walls with heavy concrete and earthen materials that have high thermal mass must be insulated due to their highest cost-saving potential (US$14–26.39/m2-year).

No abstract