The potential of using optical spectroscopic techniques, such as Raman and visible/near infrared (Vis/NIR), for on-line process control and special nuclear materials accountability applications at a spent nuclear fuel reprocessing facility was evaluated. The availability of on-line, real-time techniques that directly measure process concentrations of nuclear materials will enhance the performance and proliferation resistance of the solvent extraction processes. Further, on-line monitoring of radiochemical streams will also improve reprocessing plant operation and safety. This paper reviews the current state of development of the spectroscopic on-line monitoring techniques for such solutions. To further examine the applicability of optical spectroscopy for this application, segments of a spent nuclear fuel, with approximate burn-up values of 70 MW d/kg M, were dissolved in concentrated nitric acid and adjusted to varying final concentrations of HNO 3 . The resulting spent fuel solutions were batch-contacted with tributyl phosphate/n-dodecane organic solvent. The feed and equilibrium aqueous and loaded organic solutions were subjected to optical measurements. The obtained spectra showed the presence of quantifiable Raman bands due to NO 3 − and UO 2 2+ and Vis/NIR bands due to multiple species of Pu(IV), Pu(VI), Np(V), the Np(V)-U(VI) cation-cation complex, and Nd(III) in fuel solutions. This result justifies spectroscopic techniques as a promising methodology for monitoring spent fuel processing solutions in real-time. The fuel solution was quantitatively evaluated based on spectroscopic measurements and was compared to inductively coupled plasma-mass spectroscopy analysis and Oak Ridge Isotope Generator (ORIGEN)-based estimates.

A portable spectroelectrochemical sensor has been designed, evaluated, and demonstrated on a complex sample of radioactive waste. The sensor consisted of a black delrin sample compartment with a total internal sample volume of 800 microL, attached to an indium tin oxide coated glass multiple internal reflection optical element. Detection was by total internal reflection of light from a blue light emitting diode source. After a 10 min uptake for each standard, the sensor showed a linear response in absorbance change for 5 x 10(-5) to 5 x 10(-3) M ferrocyanide with electrochemical modulation by scanning at 20 mV/s from -0.30 V to +0.55 V vs a Ag/AgCl reference electrode. Due to the complex nature of Hanford radioactive tank waste samples containing ferrocyanide, a standard addition method was developed for analysis. The spectroelectrochemical sensor determined a concentration of 9.2 mM ferrocyanide for U-Plant-2 simulant solution containing 9.38 mM ferrocyanide that was prepared according to Hanford process flowsheets. A radioactive tank waste sample from Hanford Tank 241-C-112 was determined to be 1.0 mM in ferrocyanide using the spectroelectrochemical sensor. A value for the ferrocyanide concentration in the sample of 0.61 mM was determined by FTIR spectroscopy.

Like the Re analogue, the ligand-to-metal charge transfer (LMCT) excited-state of [Tc(dmpe)3]2+ (dmpe is bis-1,2-(dimethylphosphino)ethane) is luminescent in solution at room temperature. Surprisingly, both [M(dmpe)3]2+* species have extremely large excited-state potentials (ESPs) as oxidants-the highest for any simple coordination complex of a transition metal. Furthermore, this potential is available using a photon of visible light (calculated for M = Re(Tc); E1/2* = +2.61(2.52) V versus SCE; lambdamax = 526(585) nm). Using a Rehm-Weller analysis with a series of aromatic hydrocarbons as electron-transfer quenchers, E1/2(Re2+*/Re+) has been determined to be 2.58 V, in good agreement with the calculated value. Both [M(dmpe)3]2+* species are quenched by chloride ion and both can function as excited-state oxidants in water solution.