İş kazalarının en çok görüldüğü sektörlerden birisi olan inşaat sektöründe iş sağlığı ve güvenliği ile ilgili mevzuatın uygulanmasında sorunlar bulunmaktadır. Bu çalışmada, Türkiye'deki iş kazalarını ve kaza sonucu ortaya çıkabilecek kayıpları en aza indirmek için yapılan yasal düzenlemelerin, inşaat sektöründeki uygulama düzeyi belirlenmeye çalışılmış ve bu kapsamda işçi-usta-formen, teknik personel, yapı denetim personeli, iş güvenliği denetim personeli ve üst düzey yönetici-işveren olmak üzere sektördeki beş farklı meslek grubu çalışanlarına anket uygulanmıştır. Yapılan anket çalışması, literatür bulguları ve yasal mevzuat da göz önüne alınarak değerlendirilmiş ve iş sağlığı ve güvenliği yasal mevzuatının Türkiye inşaat sektöründe uygulanma düzeyi incelenmiştir.
İnşaat projelerinde şantiyede yapılan plansız inşaat demiri kesimlerinde oldukça fazla demir atıkları meydana gelmektedir. Bu yüzden çalışmada yapının inşaat aşaması başlamadan önce betonarme inşaat demiri atığının minimize edilmesini sağlamak için bir optimizasyon yöntemi sunulmaktadır. Bu yöntem kullanılarak inşaat demiri üretim boylarının farklı uzunluklarda üretilmesi durumunda atık miktarının daha da azaltılması amaçlanmaktadır. Çalışmada kullanılan optimizasyon yöntemi genetik algoritma ve bulanık mantık sisteminin birlikte çalışmasına dayanan CutLogic1D yazılımı ile yapıldı. Küçük, orta ve büyük ölçekli 3 farklı proje üzerinden hesaplanan inşaat demiri miktarları ile optimizasyon işlemi yapıldı. Aynı zamanda standart 12 metre üretim uzunluğunun yanı sıra alternatif farklı üretim uzunlukları ve bu uzunluklardan oluşan setler ile yapılan analizler doğrultusunda en optimum inşaat demiri atık oranları belirlendi. Yapılan analizler ile bu atık oranlarının büyük ölçüde azaltıldığı görülmektedir. Özellikle küçük, orta ve büyük ölçekli inşaatlarda S3 ve S4 alternatif üretim uzunluk setlerinde kesme kayıpları yaklaşık %1 ile minimum değerlere ulaşmaktadır. Bu çalışmada önerilen optimizasyon yöntemi ve üretim alternatiflerine göre optimum inşaat demiri atık oranlarına göre Türkiye’nin inşaat demirinden sağladığı kazanç 120597,585 ton seviyelerinde olacaktır. Bu da inşaat maliyetlerinin azaltılmasına katkı sağlayacağı gibi, ülke ekonomisine de katkı sağlayacaktır.
İnşaat sektörü, iş kazalarının çok görüldüğü sektörler arasında yer almaktadır. İş kazalarının önlenmesi için; işyerinin risk değerlendirme raporuna göre belirlenecek uygun kişisel koruyucu donanımın (KKD) çalışanlar tarafından kullanılması önemlidir. Bu çalışmada inşaat sektöründe çalışanların KKD kullanımlarına etki eden faktörler ele alınmıştır. Bu amaçla yapılan anket çalışmasından elde edilen veriler kullanılarak yapılan analizler sonucunda, bu faktörlerin KKD kullanımı üzerindeki etkileri değerlendirilmiştir.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.