Abstract. The ductility of ultra-high purity copper at elevated temperatures was investigated : purity 99.9999% (6N) and 99.999999% (8N). Tensile tests were conducted at temperatures ranging from 293K to 1073K at strain rates of 4.2~10-~ s-l in a high vacuum. The results are discussed in comparison with those for 99.9% (3N) copper.Ductility at intermediate temperatures was improved by an increase in purity. The temperature at which ductility dropped decreased with increases in purity. Even at the ultra-high purity of 8N, a small ductility drop was observed at 423K. A small number of micro voids were observed on the grain boundaries of 8N specimens after the test at 423K. 6N and 8N copper have nearly same sulphur content of about 0.015 ppm. The intermediate temperature embrittlement of these coppers might be affected not only by sulphur content, but also by total impurity content.
This paper deals with the fatigue crack propagation behavior of rolled AZ31B magnesium alloy (grain size: approximately 40 m). Fatigue crack propagation tests were performed on single edge notched tension specimens at a stress ratio of R = 0.1 and a frequency of 10 Hz at room temperature. Loading axes were parallel to the rolling direction; fatigue cracks propagated parallel to the transverse direction (L-T specimen), parallel to the short transverse direction (L-S specimen). Loading axis was perpendicular to the rolling direction; fatigue cracks propagated parallel to the transverse direction (S-T specimen). The crack growth rate (da/dN) of the L-S specimen was several times lower than that of the L-T specimen in the examined stress intensity factor range (K). Fracture surfaces of the L-T and L-S specimens showed many steps parallel and perpendicular, respectively, to the macroscopic crack growth direction. The da/dN of the S-T specimen was higher than that of the L-T and L-S specimens in the examined K. The fracture surface was covered by quasi-cleavage facets independent of macroscopic crack growth direction, and the fracture surface roughness at low K was larger than that at high K.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.