The fields of tissue engineering and regenerative medicine aim at promoting the regeneration of tissues or replacing failing or malfunctioning organs, by means of combining a scaffold/support material, adequate cells and bioactive molecules. Different materials have been proposed to be used as both three-dimensional porous scaffolds and hydrogel matrices for distinct tissue engineering strategies. Among them, polymers of natural origin are one of the most attractive options, mainly due to their similarities with the extracellular matrix (ECM), chemical versatility as well as typically good biological performance. In this review, the most studied and promising and recently proposed naturally derived polymers that have been suggested for tissue engineering applications are described. Different classes of such type of polymers and their blends with synthetic polymers are analysed, with special focus on polysaccharides and proteins, the systems that are more inspired by the ECM. The adaptation of conventional methods or non-conventional processing techniques for processing scaffolds from natural origin based polymers is reviewed. The use of particles, membranes and injectable systems from such kind of materials is also overviewed, especially what concerns the present status of the research that should lead towards their final application. Finally, the biological performance of tissue engineering constructs based on natural-based polymers is discussed, using several examples for different clinically relevant applications.
Scaffolds produced by rapid prototyping (RP) techniques have proved their value for tissue engineering applications, due to their ability to produce predetermined forms and structures featuring fully interconnected pore architectures. Nevertheless, low cell seeding efficiency and non-uniform distribution of cells remain major limitations when using such types of scaffold. This can be mainly attributed to the inadequate pore architecture of scaffolds produced by RP and the limited efficiency of cell seeding techniques normally adopted. In this study we aimed at producing scaffolds with pore size gradients to enhance cell seeding efficiency and control the spatial organization of cells within the scaffold. Scaffolds based on blends of starch with poly(ε-caprolactone) featuring both homogeneously spaced pores (based on pore sizes of 0.75 and 0.1 mm) and pore size gradients (based on pore sizes of 0.1-0.75-0.1 and 0.75-0.1-0.75 mm) were designed and produced by three-dimensional plotting. The mechanical performance of the scaffolds was characterized using dynamic mechanical analysis (DMA) and conventional compression testing under wet conditions and subsequently characterized using scanning electron microscopy and micro-computed tomography. Osteoblast-like cells were seeded onto such scaffolds to investigate cell seeding efficiency and the ability to control the zonal distribution of cells upon seeding. Scaffolds featuring continuous pore size gradients were originally produced. These scaffolds were shown to have intermediate mechanical and morphological properties compared with homogenous pore size scaffolds. The pore size gradient scaffolds improved seeding efficiency from ∼35% in homogeneous scaffolds to ∼70% under static culture conditions. Fluorescence images of cross-sections of the scaffolds revealed that scaffolds with pore size gradients induce a more homogeneous distribution of cells within the scaffold.
The present review paper examines the use of different types of polymeric matrix composites in hard tissue replacement applications. The review presents the actual state of the art in the fields of bioinert composites for permanent applications, biodegradable matrix composites for temporary applications and the emerging area of injectable composites. In all cases some recent developments are also discussed. The paper starts with an introduction to locate the reader. Bone-analogue composites are then extensively discussed. Several other systems based on an inert polymeric matrix are described, focusing on their proposed applications. A great emphasis is afterwards given to biodegradable matrix systems. The most widely used synthetic bioresorbable systems are analysed and compared with an example of natural origin degradable composites-starch based composites. Finally, composite systems that are non-processable by melt based routes and in many cases injectable are discussed in detail, including several recent developments on this emerging area of research.
Gellan gum is a polysaccharide manufactured by microbial fermentation of the Sphingomonas paucimobilis microorganism, being commonly used in the food and pharmaceutical industry. It can be dissolved in water, and when heated and mixed with mono or divalent cations, forms a gel upon lowering the temperature under mild conditions. In this work, gellan gum hydrogels were analyzed as cells supports in the context of cartilage regeneration. Gellan gum hydrogel discs were characterized in terms of mechanical and structural properties. Transmissionelectron microscopy revealed a quite homogeneous chain arrangement within the hydrogels matrix, and dynamic mechanical analysis allowed to characterize the hydrogels discs viscoelastic properties upon compression solicitation, being the compressive storage and loss modulus of approximately 40 kPa and 3 kPa, respectively, at a frequency of 1 Hz. Rheological measurements determined the sol-gel transition started to occur at approximately 36 degrees C, exhibiting a gelation time of approximately 11 s. Evaluation of the gellan gum hydrogels biological performance was performed using a standard MTS cytotoxicity test, which showed that the leachables released are not deleterious to the cells and hence were noncytotoxic. Gellan gum hydrogels were afterwards used to encapsulate human nasal chondrocytes (1 x 10(6) cells/mL) and culture them for total periods of 2 weeks. Cells viability was confirmed using confocal calcein AM staining. Histological observations revealed normal chondrocytes morphology and the obtained data supports the claim that this new biomaterial has the potential to serve as a cell support in the field of cartilage regeneration.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.