BackgroundThe literature is scanty regarding the effect of radiation therapy (RT) on the mechanical properties of immature permanent teeth.AimTo evaluate the effect of RT on the fracture resistance of simulated immature teeth submitted to different types of root reinforcement.DesignSixty‐four human teeth simulating the Cvek stage 3 of root development were distributed into eight groups (n = 8), according to exposure or not to RT (70 Gy) and the root reinforcement method: Group NR (control)—no reinforcement/no RT; Group NR + RT (control)—no reinforcement/RT; Group PO—tricalcium silicate‐based cement (TS) apical plug/canal obturation/no RT; Group PO + RT—TS apical plug/canal obturation/RT; Group TS—canal filling with TS/no RT; Group TS + RT—canal filling with TS/RT; Group FP—TS apical plug/fibreglass post/no RT; and Group FP + RT—TS apical plug/fibreglass post/RT. Fracture resistance was determined using a universal testing machine (0.5 mm/min).ResultsIn the intergroup comparison, nonirradiated teeth had higher fracture resistance (p < .05). Groups FP and FP + RT had higher fracture resistance (p < .001).ConclusionRadiotherapy affected the fracture resistance of simulated immature teeth. Reinforcement with fibreglass posts increased the fracture resistance, regardless of the radiation.
Objetivo: Realizar uma revisão de literatura sobre o efeito dos dentifrícios à base de carvão ativado sobre a estrutura dental. Materiais e Métodos: Para o levantamento dos dados foram feitas buscas nas principais bases de dados como Pubmed, LILACS, Scielo e Google acadêmico, com as palavras-chave: “Activated Charcoal”, “Dentifrices”, “Tooth Bleaching”. Foram selecionados artigos publicados em periódicos nacionais e internacionais entre os anos 2001 à 2021. Resultados: Os dentifrícios à base de carvão ativado são compostos por partículas abrasivas que alteram a superfície do esmalte dental, removendo o pigmento extrínseco. Já os agentes clareadores, agem no pigmento intrínseco do dente, por meio de uma reação oxidativa, clareando de forma efetiva. Conclusão: Os dentifrícios à base de carvão ativado podem causar mudanças de coloração dos dentes devido à remoção de manchas extrínsecas, entretanto o uso de agentes clareadores à base de peróxidos, no clareamento dental, é a estratégia mais indicada, devido à sua eficácia e segurança biológica.
Resumo Introdução O selamento dentinário imediato consiste na aplicação imediata de um sistema adesivo sobre exposições dentinárias após o preparo dental e previamente aos procedimentos de moldagem. Objetivo O objetivo do estudo foi avaliar a influência do selamento dentinário imediato (SDI) na resistência adesiva do sistema adesivo universal (Single Bond Universal, 3M ESPE) em dentina, na forma de aplicação autocondicionante. Material e método 30 incisivos bovinos foram divididos em 3 grupos (n = 10): grupo S (Sem Selamento Dentinário Imediato), grupo SDI (Selamento Dentinário Imediato) e grupo SDIF (Selamento Dentinário Imediato + Resina Flow). A superfície vestibular foi desgastada com pontas diamantadas até a exposição superficial de dentina. A simulação da lama dentinária foi realizada com lixa d’água por 30s e a dentina tratada de acordo com o respectivo grupo. Para simulação da restauração provisória, foram cimentados blocos de resina bisacrílica com cimento de óxido de zinco. Após 7 dias, foi realizada a cimentação definitiva de blocos de resina com cimento resinoso dual (RelyX ARC, 3M ESPE). Os espécimes foram seccionados para obtenção de filetes de 1mm2 e submetidos ao teste de microtração, em uma máquina universal de ensaios (Instron). Os resultados foram tabulados e submetidos a Análise de Variância (ANOVA) e teste de Tukey a 5% de significância. Resultado Observaram-se maiores valores de resistência de união para o grupo SDIF (23,53 MPa), diferindo estatisticamente do Grupo S (17,65 MPa) (p=0,008). O grupo SDI apresentou valor médio de resistência de união (19,25 MPa), não diferindo estatisticamente dos grupos S (p=0,68) e SDIF (p=0,07). Conclusão Recomenda-se a técnica de selamento dentinário imediato seguido da uma camada de resina flow, em exposições dentinárias ocasionadas pelo preparo dental para restaurações indiretas.
The objective of this study to evaluate the effect of different HF concentrations and etching times on the microshear bond strength (μSBS) of LD to resin cement. Forty LD sections (8x8 mm) of 3-mm thickness were randomly distributed (n=10) in accordance with the HF concentration (5 or 10%) and surface etching time (20 or 60 sec). The specimens were silanized and received an air-thinned layer of a light-curable adhesive. Six translucent tubes (0.8-mm diameter and 1-mm height) were positioned over each LD section, filled with resin cement and light-cured. After 24 h of storage, the tubes were carefully removed and the specimens were submitted to the μSBS test. The results submitted to a two-way analysis of variance and Sidak post hoc test (α=.05). Representative HF-etched specimens and one non-etched LD specimen were observed under a field-emission scanning electron microscope. The interaction between the HF concentrations and etching times was not significant (p=0.075). No significant differences were observed regarding HF concentrations and etching times (p=0.06 and p=0.059, respectively). Surfaces of specimens etched with 10% HF for 60 sec were found with grooves and microcracks. The μSBS of LD to resin cement was not significantly influenced by different HF concentrations and etching times; however, the LD surface morphology was found considerably modified.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.