No abstract

In the past few decades, due to the exponential increase of the world’s population, the number of discarded waste tires has become a serious ecological and environmental problem. Decomposition of waste tire rubber can take longer than 50 years, and every year the number of discarded tires is rapidly growing. With the inclusion of waste tire rubber into self-compacting concrete this global problem can be reduced. Waste tire rubber can be incorporated in self-compacting concrete by partially replacing the natural fine and coarse aggregate, reducing consumption of sand and gravel and preserving these natural materials. In addition, recycling and reusing waste tire rubber avoids the need for tire landfilling, as one of the major ecological problem of the near future. Replacement of natural aggregate with waste tire rubber can have an undesirable influence on the mechanical properties of self-compacting concrete, i.e., compressive strength, flexural strength, splitting tensile strength, and modulus of elasticity, however. On the other hand, replacing natural gravel or sand with waste tire rubber can improve impact resistance, ductility, and fatigue resistance. This paper presents an overview of the literature investigating recycled waste tire rubber used as a fine and/or coarse aggregate replacement in self-compacting concrete and its influence on several essential fresh and hardened self-compacting concrete properties.

The paper aims to investigate the influence of waste tire rubber and silica fume on the fresh and hardened properties of self-compacting concrete (SCC) and to design multivariate regression models for the prediction of the mechanical properties of self-compacting rubberized concrete (SCRC). For this purpose, 21 concrete mixtures were designed. Crumb rubber derived from end-of-life tires (grain size 0.5–3.5 mm) was replaced fine aggregate by 0%, 5%, 10%, 15%, 20%, 25%, and 30% of total aggregate volume. Silica fume was replaced cement by 0%, 5%, and 10% of the total cement mass. The optimal replacement level of both materials was investigated in relation to the values of the fresh properties and mechanical properties of self-compacting concrete. Tests on fresh and hardened self-compacting concrete were performed according to the relevant European standards. Furthermore, models for predicting the values of the compressive strength, modulus of elasticity, and flexural strength of SCRC were designed and verified with the experimental results of 12 other studies. According to the obtained results, mixtures with up to 15% of recycled rubber and 5% of silica fume, with 28 days compressive strength above 30 MPa, were found to be optimal mixtures for the potential future investigation of reinforced self-compacting rubberized concrete structural elements.

No abstract

Waste rubber takes many years to decompose, and thus the increasing number of tires in the world can be characterised as an important environmental issue, which generated the idea of implementing crumb rubber in structural self-compacting concrete (SCC). According to previous studies, up to 15% recycled rubber and 5% silica fume can be used to achieve the required properties of SCC in reinforced structural members with congested reinforcement, both in the fresh and hardened state. Most studies have focused on investigating the mechanical properties of self-compacting rubberised concrete (SCRC), and only a small number of studies investigated the durability and thermal properties, with contradictory findings. This study aims to determine the influence of crumb rubber and silica fume on the durability and thermal properties of SCC, with an emphasis on the selection of environmental exposure classes, the safety of using such a material in reinforced concrete members, and additional serviceability and durability requirements. This was further advanced by investigating the micro-structure of hardened SCC with recycled rubber and silica fume using a scanning electron microscope (SEM). Test results indicate that the combining effect of crumb rubber and silica fume has a positive impact on the thermal and durability properties of SCC.