Due to the wide variety of uses and the diversity of features required to meet an application, Internet of Things (IoT) technologies are moving forward at a strong pace to meet this demand while at the same time trying to meet the time-to-market of these applications. The characteristics required by applications, such as coverage area, scalability, transmission data rate, and applicability, refer to the Physical and Medium Access Control (MAC) layer designs of protocols. This paper presents a deep study of medium access control (MAC) layer protocols that are used in IoT with a detailed description of such protocols grouped (by short and long distance coverage). For short range coverage protocols, the following are considered: Radio Frequency Identification (RFID), Near Field Communication (NFC), Bluetooth IEEE 802.15.1, Bluetooth Low Energy, IEEE 802.15.4, Wireless Highway Addressable Remote Transducer Protocol (Wireless-HART), Z-Wave, Weightless, and IEEE 802.11 a/b/g/n/ah. For the long range group, Narrow Band IoT (NB-IoT), Long Term Evolution (LTE) CAT-0, LTE CAT-M, LTE CAT-N, Long Range Protocol (LoRa), and SigFox protocols are studied. A comparative study is performed for each group of protocols in order to provide insights and a reference study for IoT applications, considering their characteristics, limitations, and behavior. Open research issues on the topic are also identified.
Ambient gas detection and measurement had become essential in diverse fields and applications, from preventing accidents, avoiding equipment malfunction, to air pollution warnings and granting the correct gas mixture to patients in hospitals. Gas leakage can reach large proportions, affecting entire neighborhoods or even cities, causing enormous environmental impacts. This paper elaborates on a deep review of the state of the art on gas-sensing technologies, analyzing the opportunities and main characteristics of the transducers, as well as towards their integration through the Internet of Things (IoT) paradigm. This should ease the information collecting and sharing processes, granting better experiences to users, and avoiding major losses and expenses. The most promising wireless-based solutions for ambient gas monitoring are analyzed and discussed, open research topics are identified, and lessons learned are shared to conclude the study.Technologies to sense gases and wireless communications support are elaborated in Sections 5 and 6, respectively. The most promising solutions in terms of sensing methods and IoT-enabled solutions are discussed in Section 7 and open research topics are identified. Lessons learned are shared at Section 8 and, finally, Section 9 concludes the study. Background on Environmental GasesSome gases are the key to ensure the functionality of systems and entire industries, as well as the presence of other gases being a problem in other fields, causing the loss of entire production lines, as in the food industry, or even cause the loss of lives and explosions. In this section, the most important gases in terms of pollution monitoring and control, health issues, and accident prevention are listed with their main characteristics.Oxygen (O 2 ) is the most important gas for life, and is crucial in numerous fields. Patients under anesthesia, or recovering from surgery and from certain diseases need controlled O 2 doses to keep them alive and fully recovered. The decrease of oxygen levels in enclosed spaces can be related with other gases leakage, which would lead people inside these spaces to asphyxiate, leading to an unconscious state, or even to death [29]. Numerous industrial processes rely on the correct concentration of this gas to achieve the best results, mainly chemical and combustion, which without the correct percentages will not grant the best performance of systems. Engine control systems depend on the correct mixture to achieve the expected performances, whether it is lower fuel consumption or power and speed [29][30][31][32].Carbon dioxide (CO 2 ) is a colorless, odorless gas, generated by the oxidation and combustion of hydrocarbon, as well as by living beings in the respiration process. It is a key gas for the greenhouse effect, and the increase of its levels, in the presence of other gases, is related with atmospheric pollution. It is also the key gas on the oxygen production by the photosynthesis process. The accumulation of this gas in enclosed spaces can be responsible to s...
The emergence of the Internet of Things (IoT) and its applications has taken the attention of several researchers. In an effort to provide interoperability and IPv6 support for the IoT devices, the Internet Engineering Task Force (IETF) proposed the 6LoWPAN stack. However, the particularities and hardware limitations of networks associated with IoT devices lead to several challenges, mainly for routing protocols. On its stack proposal, IETF standardizes the RPL (IPv6 Routing Protocol for Low-Power and Lossy Networks) as the routing protocol for Low-power and Lossy Networks (LLNs). RPL is a tree-based proactive routing protocol that creates acyclic graphs among the nodes to allow data exchange. Although widely considered and used by current applications, different recent studies have shown its limitations and drawbacks. Among these, it is possible to highlight the weak support of mobility and P2P traffic, restrictions for multicast transmissions, and lousy adaption for dynamic throughput. Motivated by the presented issues, several new solutions have emerged during recent years. The approaches range from the consideration of different routing metrics to an entirely new solution inspired by other routing protocols. In this context, this work aims to present an extensive survey study about routing solutions for IoT/LLN, not limited to RPL enhancements. In the course of the paper, the routing requirements of LLNs, the initial protocols, and the most recent approaches are presented. The IoT routing enhancements are divided according to its main objectives and then studied individually to point out its most important strengths and weaknesses. Furthermore, as the main contribution, this study presents a comprehensive discussion about the considered approaches, identifying the still remaining open issues and suggesting future directions to be recognized by new proposals.
The significant increase in energy consumption by the growth of the population or by the use of new equipment has brought big challenges to the energy security as well as the environment. There is a need that consumers can track their daily use and understand consumption standards for better organizing themselves to obtain financial and energetic efficiency. With the improvement of smart networks technology for better energy supply, a smart meter is not just a simple measurement gadget anymore, but it has additional functions including smart equipment control, bidirectional communication that allows integration of users and networks, and other functionalities. Smart meters are the most fundamental components in smart power grids. Besides, the meters used with a management system can be utilized for monitoring and controlling home appliances and other gadgets according to the users' need. A solution of an integrated and single system should be more efficient and economical. Smart measurement systems allow monitoring the energy consumption of the final consumers while providing useful information about the energy quality. The information provided by these systems is used by the operators to enhance the energy supply, and different techniques can be also applied for this end, such as charge scheduling, management from the demand side, and nonintrusive load monitoring. The Internet of Things (IoT) is becoming a great ally in the management of smart distribution and energy consumption in smart systems scenarios. To address these issues, this paper proposes and demonstrates a new smart energy meter following an IoT approach and its associated costs and benefits. The developed device incorporates several communication interfaces. In order to easily integrate with any monitoring software solution, the meter has a multi-protocol connection. Finally, the provided solution is validated and demonstrated in real-life environments and it is also under use.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.