Summary In the modern world, only conventional energy resources cannot fulfil the growing energy demand. Electricity is a fundamental building block of a technological revolution. Today, most of the electricity demand is met by the burning of fossil fuels but at the cost of adverse environmental impact. In order to bridge the gap between electricity demand and supply, nonconventional and eco‐friendly means of energy generation are considered. Renewable energy systems (RESs) offer an adequate solution to mitigate the challenges originated due to greenhouse gasses (GHG). However, they have an unpredictable power generation with specific site requirements. Grid integration of RESs may lead to new challenges related to power quality, reliability, power system stability, harmonics, subsynchronous oscillations (SSOs), power quality, and reactive power compensation. The integration with energy storage systems (ESSs) can reduce these complexities that arise due to the intermittent nature of RESs. In this paper, a comprehensive review of renewable energy sources has been presented. Application of ESSs in RESs and their development phase has been discussed. Role of ESSs in increasing lifetime, efficiency, and energy density of power system having RESs has been reviewed. Moreover, different techniques to solve the critical issues like low efficiency, harmonics, and inertia reduction in photovoltaic (PV) systems have been presented. Unlike most of the available review papers, this article also investigates the impact of FACTS technology in RESs‐based power system using multitype flexible AC transmission system (FACTS) controllers. Three simulation models have been developed in MATLAB/Simulink. The results show that FACTS devices help to maintain the stability of RESs integrated power system. This review paper is believed to be of potential benefit for researchers from both the industry and academia to develop better understanding of challenges and solution techniques for REs‐based power systems and future research dimensions in this area.

The state-of-charge (SoC) of an energy storage system (ESS) should be kept in a certain safe range for ensuring its state-of-health (SoH) as well as higher efficiency. This procedure maximizes the power capacity of the ESSs all the times. Furthermore, economic load dispatch (ELD) is implemented to allocate power among various ESSs, with the aim of fully meeting the load demand and reducing the total operating cost. In this research article, a distributed multi-agent consensus based control algorithm is proposed for multiple battery energy storage systems (BESSs), operating in a microgrid (MG), for fulfilling several objectives, including: SoC trajectories tracking control, economic load dispatch, active and reactive power sharing control, and voltage and frequency regulation (using the leader-follower consensus approach). The proposed algorithm considers the hierarchical control structure of the BESSs and the frequency/voltage droop controllers with limited information exchange among the BESSs. It embodies both self and communication time-delays, and achieves its objectives along with offering plug-and-play capability and robustness against communication link failure. Matlab/Simulink platform is used to test and validate the performance of the proposed algorithm under load disturbances through extensive simulations carried out on a modified IEEE 57-bus system. A detailed comparative analysis of the proposed distributed control strategy is carried out with the distributed PI-based conventional control strategy for demonstrating its superior performance.

Renewable energy resources connected to a single utility grid system require highly nonlinear control algorithms to maintain efficient operation concerning power output and stability under varying operating conditions. This research work presents a comparative analysis of different adaptive Feedback Linearization (FBL) embedded Full Recurrent Adaptive Neuro-Fuzzy (FRANF) control schemes for maximum power point tracking (MPPT) of PV subsystem tied to a smart microgrid hybrid power system (SMG-HPS). The proposed schemes are differentiated based on structure and mathematical functions used in FRANF embedded in the FBL model. The comparative analysis is carried out based on efficiency and performance indexes obtained using the power error between the reference and the tracked power for three cases; a) step change in solar irradiation and temperature, b) partial shading condition (PSC), and c) daily field data. The proposed schemes offer enhanced convergence compared to existing techniques in terms of complexity and stability. The overall performance of all the proposed schemes is evaluated by a spider chart of multivariate comparable parameters. Adaptive PID is used for the comparison of results produced by proposed control schemes. The performance of Mexican hat wavelet-based FRANF embedded FBL is superior to the other proposed schemes as well as to aPID based MPPT scheme. However, all proposed schemes produce better results as compared to conventional MPPT control in all cases. Matlab/Simulink is used to carry out the simulations.

Summary Static Synchronous Compensator (STATCOM) is a shunt‐connected Flexible AC Transmission System (FACTS) controller with the primary goal of power flow control on a transmission line. However, it can effectively be used for improving power system stability by incorporating a Supplementary Damping Control (SDC) for bus voltage regulation. This paper presents an SDC strategy based on the integration of Type‐2 fuzzy logic and Wavelet Neural Network (WNN) in NeuroFuzzy structure. The fuzziness in Type‐2 membership function increases the controller capability to handle uncertainties. The performance improvement has been investigated by introducing uncertainty in mean initially and then in both the mean and SD of the Gaussian Type‐2 membership function. A multi‐machine power system installed with SDC‐based STATCOM is used to test the controller performance using different fault scenarios. The comparative evaluation of proposed controllers is done with Adaptive NeuroFuzzy TSK Control (ANFTSKC) and without SDC scenarios. In results, significant performance improvement has been observed in both steady‐state and transient regions for recommended Type‐2 NeuroFuzzy Wavelet Control (NFWC) strategies.

Intelligent Transport Systems (ITS) require accurate information to be shared among vehicles and infrastructure nodes for applications including accident information or pre-crash warnings, to name a few. Due to its sensitive nature, ITS applications are vulnerable against data integrity attacks where nodes transmit false information that results in wrong decision making by the applications. A characteristic of such attacks is that the false transmitted information is significantly different than the actual information. In this paper, we propose an Outlier Detection, Prioritization and Verification (ODPV) protocol that efficiently isolates false data and improves traffic management decisions. ODPV uses the isolation forest algorithm to detect outliers, fuzzy logic to prioritize outliers and C-V2X communications to verify the outliers. Extensive simulation results verify the effectiveness of the proposed protocol to isolate the outliers.