Dislocation velocities and mobilities are studied by Molecular Dynamics simulations for edge and screw dislocations in pure aluminum and nickel, and edge dislocations in Al-2.5%Mg and Al-5.0%Mg random substitutional alloys using EAM potentials. In the pure materials, the velocities of all dislocations are close to linear with the ratio of (applied stress)/(temperature) at low velocities, consistent with phonon drag models and quantitative agreement with experiment is obtained for the mobility in Al. At higher velocities, different behavior is observed. The edge dislocation velocity remains dependent solely on (applied stress)/(temperature) up to approximately 1.0 MPa/K, and approaches a plateau velocity that is lower than the smallest "forbidden" speed predicted by continuum models. In contrast, above a velocity around half of the smallest continuum wave speed, the screw dislocation damping has a contribution dependent solely on stress with a functional form close to that predicted by a radiation damping model of Eshelby. At the highest applied stresses, there are several regimes of nearly constant (transonic or supersonic) velocity separated by velocity gaps in the vicinity of forbidden velocities; various modes of dislocation disintegration and destabilization were also encountered in this regime. In the alloy systems, there is a temperatureand concentration-dependent pinning regime where the velocity drops sharply below the pure metal velocity. Above the pinning regime but at moderate stresses, the velocity is again linear in (applied stress)/(temperature) but with a lower mobility than in the pure metal.2

Vocal fold scarring disrupts the viscoelastic properties of the lamina propria that are critical for normal phonation. There is a clinical need for the development of advanced biomaterials that approximate the mechanical properties of the lamina propria for in vivo vocal fold regeneration. We have developed hyaluronic acid (HA)-based microgels and cross-linked microgel networks with tunable degradation and mechanical properties. HA microgels were prepared by cross-linking HA derivatives carrying hydrazide (HAADH) and aldehyde (HAALD) functionalities within the inverse emulsion droplets. Alternatively, poly(ethylene glycol) dialdehyde (PEGDiALD) was employed in place of HAALD. Microgels based on HAADH/HAALD are more resistant to enzymatic degradation than those generated from HAADH/PEGDiALD. In vitro cytotoxicity studies using vocal fold fibroblasts indicate that microgels synthesized from HAADH/HAALD are essentially nontoxic, whereas microgels derived from HAADH/PEGDiALD exhibit certain adverse effects on the cultured cells at high concentration (> or =2 mg/mL). These microgels exhibit residual functional groups that can be used as reactive handles for covalent conjugation of therapeutic molecules. The presence of residual functional groups also allows for subsequent cross-linking of the microgels with other reactive polymers, giving rise to doubly cross-linked networks (DXNs) with tunable viscoelasticity. Mechanical measurements using a torsional wave apparatus indicate that HA-based DXNs exhibit elastic moduli that are similar to those of vocal fold lamina propria at frequencies close to the range of human phonation. These HA-based microgel systems are promising candidates for the treatment of vocal fold scarring, not just as biocompatible filler materials, but as smart entities that can repair focal defects, smooth the vocal fold margin, and potentially soften and dissolve scar tissue.