In the present paper the drawing processes of thin wire of biocompatible magnesium alloys in heated die was investigated. Due to the hexagonal close packet structure magnesium alloys have low plasticity. In order to design the technological parameters the FEM model of wire drawing process in heated die and models of yield stress and ductility were developed. The relationship between technological parameters of drawing and fracture parameters was obtained based on developed models. The maps of possible elongation for MgCa0.8 and Ax30 magnesium alloys were developed using simulations. The draft schedule for final wire diameter 0.1 mm was design assisted with FEM model in experimental part of work. Based on this draft plan the drawing process from initial diameter 1.0 mm to final diameter 0.1 mm in heated die was performed in designed by author's device.Specjalne stopy magnezu (MgCa08, Ax30), wykazujące wysoki poziom biokompatybilności ze środowiskiem organizmu człowieka, stały się alternatywnym materiałem do zastosowania na implanty medyczne. Jednym z ich zastosowań mogą być nici chirurgiczne, służące do spajania tkanki miękkiej. Nici takie powinny mieć średnicę rzędu 0.1 mm. W związku z niską technologiczną plastycznością tych stopów zaproponowano, aby proces ciągnienia prowadzić w podgrzewanych ciągadłach. W pracy analizowano proces ciągnienia w podgrzewanych ciągadłach cienkich drutów z biokompatybilnych stopów magnezu. W celu wyznaczenia technologicznych parametrów procesu ciągnienia użyto modelu MES, który rozbudowano o rozwiązanie cieplne w ciągadle, funkcję naprężenia uplastyczniającego oraz model utraty spójności analizowanych stopów. W oparciu o opracowany model wyznaczono zależności pomiędzy technologicznymi parametrami procesu ciągnienia i kryterium utraty spójności. W oparciu o symulacje numeryczne zbudowano mapy dopuszczalnych odkształceń dla stopów magnezu MgCa0.8 oraz Ax30. W części eksperymentalnej pracy w oparciu o symulacje numeryczne wyznaczono schemat odkształceń do uzyskania drutu o średnicy 0.1 mm. W oparciu o wyznaczony schemat przeprowadzono proces ciągnienia w podgrzewanych ciągadłach ze średnicy początkowej 1.0 mm do średnicy końcowej 0.1 mm w urządzeniu skonstruowanym przez autorów.
High strength biodegradable surgical threads are in demand for surgical practice. Nowadays, such threads can be made of metallic materials such as magnesium, zinc or alloys based on these metals. In current paper, manufacturing technology of biodegradable surgical threads of Mg–Ca alloys and of pure Zn was developed and basic properties of the obtained product have been characterized. The influence of in vitro corrosion in bovine serum simulating environment in the mammal’s body on the surgical threads mechanical properties was determined. It was found that Zn and hot extruded alloys MgCa0.9 and MgCa1.2 can be recommended as a candidate for the future study in vivo. Properties of the room temperature drawn wires of the alloy MgCa0.7 are not sufficient for its application as surgical threads.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.