Sensing the force digitally Our skin provides us with a flexible waterproof barrier, but it also contains a sensor array that feels the world around us. This array provides feedback and helps us to avoid a hot object or increase the strength of our grip on an object that may be slipping away. Tee et al. describe an approach to simulate the mechanoreceptors of human skin, using pressure-sensitive foils and printed ring oscillators (see the Perspective by Anikeeva and Koppes). The sensor successfully converted pressure into a digital response in a pressure range comparable to that found in a human grip. Science , this issue p. 313 ; see also p. 274

Indium–gallium nitride (InGaN) multiple-quantum-well (MQW) light-emitting diode (LED) membranes, prefabricated on sapphire growth substrates, were created using pulsed-excimer laser processing. The thin-film InGaN MQW LED structures, grown on sapphire substrates, were first bonded onto a Si support substrate with an ethyl cyanoacrylate-based adhesive. A single 600 mJ/cm2, 38 ns KrF (248 nm) excimer laser pulse was directed through the transparent sapphire, followed by a low-temperature heat treatment to remove the substrate. Free-standing InGaN LED membranes were then fabricated by immersing the InGaN LED/adhesive/Si structure in acetone to release the device from the supporting Si substrate. The current–voltage characteristics and room-temperature emission spectrum of the LEDs before and after laser lift-off were unchanged.

No abstract

Solid polymer electrolytes (SPEs) have attracted considerable attention due to the rapid development of the need for more safety and powerful lithium ion batteries. The prime requirements of solid polymer electrolytes are high ion conductivity, low glass transition temperature, excellent solubility to the conductive lithium salt, and good interface stability against Li anode, which makes PEO and its derivatives potential candidate polymer matrixes. This review mainly encompasses on the synthetic development of PEO-based SPEs (PSPEs), and the potential application of the resulting PSPEs for high performance, all-solid-state lithium ion batteries.