The feasibility of using quartz nanopipets as simple and cost-effective Coulter counters for calibration-less quantitation and sizing of nanoparticles by resistive pulsing sensing (RPS) was investigated. A refined theory was implemented to calculate the size distribution of nanoparticles based on the amplitude of resistive pulses caused by their translocation through nanopipets of known geometry. The RPS provided diameters of monodisperse latex nanoparticles agreed within the experimental error with those measured by using scanning electron microscopy (SEM), dynamic light scattering (DLS), and nanoparticle tracking analysis (NTA). The nanopipet-based counter, by detecting individual nanoparticles, could resolve with similar resolution as SEM mixtures of monodisperse nanoparticles having partially overlapping size distributions, which could not be discriminated by DLS or NTA. Furthermore, by calculating the hydrodynamic resistance of the nanopipets and consequently the volume flow through the tip enabled for the first time the calibration-less determination of nanoparticle concentrations with nanopipets. The calibration-less methodology is applied to sizing and quantitation of inactivated poliovirus of ~26 nm diameter, which is the smallest size spherical shape virus ever measured by resistive pulse sensing.
We propose a calibration‐free resistive pulse sensing (RPS) methodology based on nanopipets to follow the size and concentration changes of nanoparticles during size‐selective separation processes. The study was performed with monodisperse latex nanoparticles and their mixtures that were subjected to separation procedures such as filtration through track‐etch membranes of various pore diameters as well as centrifugal filtration. The RPS measurements were found to be suitable to determine both the recovery of the nanoparticles after filtration as well as subtle changes in their size distribution. Filtration through track‐etch membranes preserved the mean size of the nanoparticles while their recovery was affected by the size of the pore and coexistence of larger nanoparticle fractions in the sample. Centrifugal filtration resulted in the appearance of aggregates.
One of the main challenges of sizing methods for nanoparticle (NP) suspensions is to distinguish between particles and particle populations with very small size differences. This would be especially important to follow various surface functionalization processes of nanoparticles resulting in small alterations of their size. In this respect, methods involving the detection of single particles, such as resistive pulse sensing (RPS) or nanoparticle tracking analysis, are generally considered superior to ensemble measuring methods such as dynamic light scattering. However, to compare the exact capabilities of these methodologies require systematic investigations in optimized conditions for each method. Here, such a study is presented for a narrow size range of spherical latex nanoparticles (60–200 nm). It is concluded that the RPS methodology based on quartz nanopipets as single nanopore counters, is the only sizing method among those studied capable to fully resolve a ternary mixture of 70, 110, and 140 nm average diameter NPs. The practical usefulness of this size resolution is demonstrated by following the increase in diameter of latex nanoparticles after their surface modification with antibodies.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.