No abstract

Cs 3 Cu 2 I 5 nanocrystals (NCs) are considered to be promising materials due to their high photoluminescence efficiency and X-ray hardness. However, the present strategy depends on tedious fabrication with excessive chemical waste. The evasive iodide ion dissociation, inadaptable ligand system, low stability, and relatively low light yield severely impede their applications. Herein, we develop an in situ fabrication strategy for a flexible and large-area Tl-doped Cs 3 Cu 2 I 5 NC-polymer composite scintillation film with a high light yield (∼48800 photons/ MeV) and improved stability. Tween 80 and phosphinic acid successfully inhibit the oxidation of iodide ions, and the films can be stored for at least six months. As a result, a high spatial resolution of 16.3 lp mm −1 and a low detection limit of 305 nGy air s −1 were achieved. A radioluminescence intensity of >80% was maintained after a total irradiation dose of 604.8 Gy. These results indicate the promising application of these copper halide NCs in low-cost, flexible, and high-performance medical imaging.

Although perovskite X-ray detectors have revealed promising properties, their dark currents are usually hundreds of times larger than the practical requirements. Here, we report a detector architecture with a unique shunting electrode working as a blanking unit to suppress dark current, and it theoretically can be reduced to zero. We experimentally fabricate the dark-current-shunting X-ray detector, which exhibits a record-low dark current of 51.1 fA at 5 V mm−1, a detection limit of 7.84 nGyair s−1, and a sensitivity of 1.3 × 104 μC Gyair−1 cm−2. The signal-to-noise ratio of our polycrystalline perovskite-based detector is even outperforming many previously reported state-of-the-art single crystal-based X-ray detectors by serval orders of magnitude. Finally, the proof-of-concept X-ray imaging of a 64 × 64 pixels dark-current-shunting detector array is successfully demonstrated. This work provides a device strategy to fundamentally reduce dark current and enhance the signal-to-noise ratio of X-ray detectors and photodetectors in general.

Conventional energy-integration black-white X-ray imaging lacks spectral information of X-ray photons. Although X-ray spectra (energy) can be distinguished by photon-counting technique typically with CdZnTe detectors, it is very challenging to be applied to large-area flat-panel X-ray imaging (FPXI). Herein, we design multi-layer stacked scintillators of different X-ray absorption capabilities and scintillation spectrums, in this scenario, the X-ray energy can be discriminated by detecting the emission spectra of each scintillator, therefore the multispectral X-ray imaging can be easily obtained by color or multispectral visible-light camera in one single shot of Xray. To verify this idea, stacked multilayer scintillators based on several emerging metal halides were fabricated in the cost-effective and scalable solution process, and proofof-concept multi-energy FPXI were experimentally demonstrated. The dual-energy Xray image of a "bone-muscle" model clearly showed the details that were invisible in conventional energy-integration FPXI. By stacking four layers of specifically designed multilayer scintillators with appropriate thicknesses, a prototype FPXI with four energy channels was realized, proving its extendibility to multispectral or even hyperspectral X-ray imaging. This study provides a facile and effective strategy to realize energyresolved flat-panel X-ray imaging.