Engineering of multifunctional binding chemistry on graphene composites using thiol–ene click reaction for selective and highly efficient adsorption of mercury­(II) is demonstrated. Graphene oxide (GO) is used as an initial material for covalent attachment of cysteamine molecules by thiol–ene click reaction on CC groups to achieve a partially reduced graphene surface with multiple binding chemistry such as O, S, and N. Batch adsorption studies showed remarkable adsorption rate with only 1 mg L–1 dosage of adsorbent used to remove 95% Hg (II) (∼1.5 mg L–1) within 90 min. The high adsorption capacity of 169 ± 19 mg g–1, high selectivity toward Hg in the presence of 30 times higher concentration of competing ions (Cd, Cu, Pb) and high regeneration ability (>97%) for five consecutive adsorption–desorption cycles were achieved. Comparative study with commercial activated carbon using spiked Hg (II) river water confirmed the high performance and potential of this adsorbent for real mercury remediation of environmental and drinking waters.

Thermogravimetric analysis (TGA) has been recognized as a simple and reliable analytical tool for characterization of industrially manufactured graphene powders. Thermal properties of graphene are dependent on many parameters such as particle size, number of layers, defects and presence of oxygen groups to improve the reliability of this method for quality control of graphene materials, therefore it is important to explore the influence of these parameters. This paper presents a comprehensive TGA study to determine the influence of different particle size of the three key materials including graphene, graphene oxide and graphite on their thermal parameters such as carbon decomposition range and its temperature of maximum mass change rate (Tmax). Results showed that Tmax values derived from the TGA-DTG carbon combustion peaks of these materials increasing from GO (558–616 °C), to graphene (659–713 °C) and followed by graphite (841–949 °C) The Tmax values derived from their respective DTG carbon combustion peaks increased as their particle size increased (28.6–120.2 µm for GO, 7.6–73.4 for graphene and 24.2–148.8 µm for graphite). The linear relationship between the Tmax values and the particle size of graphene and their key impurities (graphite and GO) confirmed in this study endows the use of TGA technique with more confidence to evaluate bulk graphene-related materials (GRMs) at low-cost, rapid, reliable and simple diagnostic tool for improved quality control of industrially manufactured GRMs including detection of “fake” graphene.

Graphene and related 2D materials offer an ideal platform for next generation disruptive technologies and in particular the potential to produce printed electronic devices with low cost and high throughput....

No abstract

The coexistence of multiple toxic water pollutants (heavy metals, organic dyes, oils, and organic solvents) limits the sustainable supply of clean water worldwide and urges the development of advanced water purification technology that can remove these contaminants simultaneously. Since its discovery, graphene‐based materials have gained substantial attention toward development of new‐generation sorbents for water purification. Despite several recently published reviews on water purification technology using graphene and its derivatives, there is still a gap in the review considering multiple water‐pollutant remediation using advanced graphene materials. In this review, in the first instance, a comparative structure–function–performance relationship between graphene‐based sorbents and the multipollutants in water is established. A fundamental correlation is made between the sorption performance for diverse pollutants in water with the more specific adsorption properties (surface area, pore size, type of functional groups, C/O, C/N, and C/S atomic ratio) of advanced graphene sorbents. Second, the underlying interaction mechanisms are uncovered between different classes of water pollutants using single graphene‐based sorbents. Third, the rational design of advanced multipollutant sorbents based on graphene is elaborated. The reality, challenges, and opportunities of advanced graphene materials as emerging sorbents for sustainable water purification technology are finally presented in the last section.