New experiments in 2013-2014 have investigated the physics responsible for the decrease in H-mode pedestal confinement observed in the initial phase of JET-ILW operation (2012 Experimental Campaigns). The effects of plasma triangularity, global beta and neutrals-both D and low-Z impurities-on pedestal confinement and stability have been investigated systematically. The stability of JET-ILW pedestals is analysed in the framework of the Peeling-Ballooning model and the pedestal predictive code EPED. Low D neutrals content in the plasma, achieved either by low D 2 gas injection rates or by divertor configurations with optimum pumping, and high beta are necessary conditions for good pedestal (and core) performance. In such conditions the pedestal stability is consistent with the Peeling-Ballooning paradigm. Moderate to high D 2 gas rates, required for W control and stable H-mode operation with the ILW, lead to increased D neutrals content in the plasma and additional physics in the pedestal models may be required to explain the onset of the ELM instability. The physics mechanism leading to the beneficial increase in pedestal temperature with N 2 seeding in high triangularity JET-ILW H-modes is not yet understood. The changes in H-mode performance associated with the change in JET wall composition from C to Be/W point to D neutrals and low-Z impurities playing a role in pedestal stability, elements which are not currently included in pedestal models. These aspects need to be addressed in order to progress towards full predictive capability of the pedestal height.

We present the results of experiments in JET to study the effect of plasma shape on high density ELMy H-modes, with geometry of the magnetic boundary similar to that envisaged for the standard Q = 10 operation in ITER. The experiments described are single lower null plasmas, with standard q profile, neutral beam heating and gas fuelling, with average plasma triangularity δ calculated at the separatrix ∼0.45-0.5 and elongation κ ∼ 1.75. In agreement with the previous results obtained in JET and other divertor Tokamaks, the thermal energy confinement time and the maximum density achievable in steady state for a given confinement enhancement factor increase with δ. The new experiments have confirmed and extended the earlier results, achieving a maximum line average density n e ∼ 1.1n GR for H 98 ∼ 0.96. In this plasma configuration, at 2.5 MA/2.7 T (q 95 ∼ 2.8), a line average density ∼95% n GR with H 98 = 1 and β N ∼ 2 are obtained, with plasma thermal stored energy content W th being approximately constant with increasing density, as long as the discharge maintains Type I ELMs, up to n ped ∼ n GR (and n e ∼ 1.1n GR). A change in the Type I ELMs behaviour is observed for pedestal densities n ped 70% n GR , with their frequency decreasing with density (at constant P sep), enhanced divertor D α emission and increased inter-ELM losses. We show that this change in the ELM character at high pedestal density is due to a change in transport and/or stability in the pedestal region, with the ELMs changing from Type I to mixed Type I and Type II. The similarity of these observations with those in the Type II ELM regime in ASDEX Upgrade and

Recent experiments on the Type I ELMy H-mode regime performed at JET with improved diagnostics have expanded the range of parameters for the study of Type I ELM energy and particle losses. Deviations from the standard behaviour of such losses in some areas of the Type I ELMy H-mode operating space have revealed that the ELM losses are correlated with the parameters (density and temperature) of the pedestal plasma before the ELM crash, while other global ELM characteristics (such as ELM frequency) are a consequence of the ELMdriven energy and particle flux and of the in-between ELM energy and particle confinement. The relative Type I ELM plasma energy loss (to the pedestal energy) is found to correlate well with the collisionality of the pedestal plasma, showing a weak dependence on the method used to achieve those pedestal plasma parameters: plasma shaping, heating, pellet injection and impurity seeding. Effects of edge plasma collisionality and transport along the magnetic field on the Type I ELM particle and energy fluxes onto the divertor target have also been observed. Two possible physical mechanisms that may give rise to the observed collisionality dependence of ELM energy losses are proposed and their consistency with the experimental measurements investigated: collisionality dependence of the edge bootstrap current with its associated influence on the ELM MHD origin and the limitation of the ELM energy loss by the impedance of the divertor target sheath to energy flow during the ELM event.

No abstract