Nanocomposite microcapsules with both gold and magnetite nanoparticles in the shell were prepared in a layer-by-layer procedure using biocompatible polyelectrolytes and nanoparticles. The process of a nanocomposite multilayer formation was investigated using a quartz crystal microbalance (QCM). In addition, nanocomposite microcapsules were characterized by atomic force microscopy (AFM), transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDX). It is found that the amount of adsorbed nanoparticles is similar for nanoparticles of various sizes, while the concentration of gold nanoparticles in the shell is higher for smaller nanoparticles. Adsorption of gold nanoparticles is found to be more effective than adsorption of magnetic nanoparticles. Multifunctionality of microcapsules is manifested by dual: magnetic and optical responses. Iron oxide nanoparticles embedded in the microcapsule shell allowed for control over capsules positioning by external magnetic fields. Furthermore, the nanocomposite microcapsules could be opened by laser irradiation; these results are of interest for medical and biological applications.

Calcium carbonate (CaCO3) has attracted scientific attention due to its essential role in both inorganic and bioorganic chemistry. Vaterite is the least thermodynamically stable CaCO3 polymorph and has elicited great interest as an advanced biomaterial for tissue engineering, drug delivery, and a broad range of personal care products. Numerous methods of vaterite particle synthesis with different sizes and morphologies have highlighted the submicron porous particles of spherical or ellipsoidal shape as the most useful ones. In this regard, the current study is aimed at development of a reliable method for synthesis of such structures. Herein, submicron vaterite particles are synthesized by dropwise precipitation from saturated sodium carbonate and calcium chloride solutions in the presence of ethylene glycol while manipulating the concentration ratios of reagents. We demonstrate that our novel technique named “dropwise precipitation” leads to changing calcium concentrations in the reaction solution at each moment affecting the crystallization process. The proposed technique allows routine obtainment of vaterite particles of a required shape, either spherical or ellipsoidal, and a controlled size in the range from 0.4 to 2.7 μm and (0.4 × 0.7) to (0.7 × 1.1) μm, respectively. The key parameters influencing the size, shape, and percent of vaterite fraction for synthesized CaCO3 particles are discussed.

This paper presents the synthesis of highly biocompatible and biodegradable poly­(lactide-co-glycolide) (PLGA) microchamber arrays sensitive to low-intensity therapeutic ultrasound (1 MHz, 1–2 W, 1 min). A reliable method was elaborated that allowed the microchambers to be uniformly filled with epinephrine hydrochloride (EH), with the possibility of varying the cargo amount. The maximum load of EH was 4.5 μg per array of 5 mm × 5 mm (about 24 pg of EH per single microchamber). A gradual, spontaneous drug release was observed to start on the first day, which is especially important in the treatment of acute patients. Ultrasound triggered a sudden substantial release of EH from the films. In vivo real-time studies using a laser speckle contrast imaging system demonstrated changes in the hemodynamic parameters as a consequence of EH release under ultrasound exposure. We recorded a decrease in blood flow as a vascular response to EH release from a PLGA microchamber array implanted subcutaneously in a mouse. This response was immediate and delayed (1 and 2 days after the implantation of the array). The PLGA microchamber array is a new, promising drug depot implantable system that is sensitive to external stimuli.

No abstract

Expandable metallic stent placement is often the only way to treat airway obstructions. Such treatment with an uncoated stent causes granulation proliferation and subsequent restenosis, resulting in the procedure’s adverse complications. Systemic administration of steroids drugs in high dosages slows down granulation tissue overgrowth but leads to long-term side effects. Drug-eluting coatings have been used widely in cardiology for many years to suppress local granulation and reduce the organism’s systemic load. Still, so far, there are no available analogs for the trachea. Here, we demonstrate that PLA-, PCL- and PLGA-based films with arrays of microchambers to accommodate therapeutic substances can be used as a drug-eluting coating through securely fixing on the surface of an expandable nitinol stent. PCL and PLA were most resistant to mechanical damage associated with packing in delivery devices and making it possible to keep high-molecular-weight cargo. Low-molecular-weight methylprednisolone sodium succinate is poorly retained in PCL- and PLGA-based microchambers after immersion in deionized water (only 9.5% and 15.7% are left, respectively). In comparison, PLA-based microchambers retain 96.3% after the same procedure. In vivo studies on rabbits have shown that effective granulation tissue suppression is achieved when PLA and PLGA are used for coatings. PLGA-based microchamber coating almost completely degrades in 10 days in the trachea, while PLA-based microchamber films partially preserve their structure. The PCL-based film coating is most stable over time, which probably causes blocking the outflow of fluid from the tracheal mucosa and the aggravation of the inflammatory process against the background of low drug concentration. Combination and variability of polymers in the fabrication of films with microchambers to retain therapeutic compounds are suggested as a novel type of drug-eluting coating.