In this study, a solvent extraction technique was investigated for the recovery of hydrocarbons from a concentrated slurry of Botryococcus braunii via thermal pretreatment. Efficient hydrocarbon recovery was achieved by preheating the slurry to temperatures below 100℃ to achieve the separation of solids (solid-liquid separation), followed by the solvent extraction of hydrocarbons. This procedure did not require a highly energy consuming drying process. Parameters affecting the energy profit ratio and economy of hydrocarbon recovery, such as heating temperature, water content after solid-liquid separation, extraction time, and solvent-to-algae ratio, were examined with respect to hydrocarbon recovery efficiencies; it was found that heating the mixture to below 100 ℃ was sufficient for good hydrocarbon recoveries. It was also shown that solvent extraction carried out at room temperature required 2 h to reach saturation. At least 90% of the hydrocarbons could be recovered, even with low solvent-toalgae ratios, by adjusting the algae water content to around 85 wt%.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.