Low-cost, non-noble-metal electrocatalysts are required for direct methanol fuel cells,b ut their development has been hindered by limited activity,high onset potential, low conductivity,a nd poor durability.Asurface electronic structure tuning strategy is presented, which involves doping of aforeign oxophilic post-transition metal onto transition metal aerogels to achieve an on-noble-metal aerogel Ni 97 Bi 3 with unprecedented electrocatalytic activity and durability in methanol oxidation. Trace amounts of Bi are atomically dispersed on the surface of the Ni 97 Bi 3 aerogel, which leads to an optimum shift of the d-band center of Ni, large compressive strain of Bi, and greatly increased conductivity of the aerogel. The electrocatalyst is endowed with abundant active sites, efficient electron and mass transfer,r esistance to CO poisoning, and outstanding performance in methanol oxidation. This work sheds light on the design of high-performance non-noblemetal electrocatalysts.

As an emerging class of highly and hierarchically porous materials with continuous conductive metal network backbones, metal aerogels have unleashed tremendous potential in various fields, especially in electrocatalysis. However, it remains a great challenge to maximize the utilization of the intrinsic structural advantages of metal aerogels due to the collapse of their structure during conventional electrode preparation caused by their brittle character. Herein, a general in situ silicone‐confined gelation strategy is developed to integrate metal aerogels (PtPd, PtAg, PdAg, and AuAg) into/onto macroporous skeletons (carbon cloth, carbon fiber foam, and nickel foam). The composite materials have good mechanical flexibility, and can be utilized directly under the condition of well‐preserved intrinsic structure of metal aerogels. This not only results in more efficient electron transfer and faster mass transport, but also eliminates Ostwald ripening and aggregation, leading to both remarkably enhanced activity and durability when compared to that made by conventional ink drop coating with collapsed and compressed structure. This work represents a significant breakthrough for metal aerogels, and provides inspiration for electrocatalyst design with both high activity and durability.

Low-cost, non-noble-metal electrocatalysts are required for direct methanol fuel cells,b ut their development has been hindered by limited activity,high onset potential, low conductivity,a nd poor durability.Asurface electronic structure tuning strategy is presented, which involves doping of aforeign oxophilic post-transition metal onto transition metal aerogels to achieve an on-noble-metal aerogel Ni 97 Bi 3 with unprecedented electrocatalytic activity and durability in methanol oxidation. Trace amounts of Bi are atomically dispersed on the surface of the Ni 97 Bi 3 aerogel, which leads to an optimum shift of the d-band center of Ni, large compressive strain of Bi, and greatly increased conductivity of the aerogel. The electrocatalyst is endowed with abundant active sites, efficient electron and mass transfer,r esistance to CO poisoning, and outstanding performance in methanol oxidation. This work sheds light on the design of high-performance non-noblemetal electrocatalysts.

No abstract

The dimeric di‐μ‐chlorido anion hexachloridopalladate(II)platinate(II) has been prepared as a mixture with hexachloridodipalladate(II) and hexachloridodiplatinate(II) and has been identified by using a combination of X‐ray crystallography and 195Pt NMR spectroscopy. This is the first report of a heterodinuclear dimer of this type.