To solve the phase matching and analyte filling problems in the microstructured optical fiber (MOF)-based surface plasmon resonance (SPR) sensors, we present the D-shaped hollow core MOF-based SPR sensor. The air hole in the fiber core can lower the refractive index of a Gaussian-like core mode to match with that of a plasmon mode. The analyte is deposited directly onto the D-shaped flat surface instead of filling the fiber holes. We numerically investigate the effect of the air hole in the core on the SPR sensing performance, and identify the sensor sensitivity on wavelength, amplitude and phase. This work allows us to determine the feasibility of using the D-shaped hollow-core MOFs to develop a high-sensitivity, real-time and distributed SPR sensor.
We propose a temperature sensor design based on surface plasmon resonances (SPRs) supported by filling the holes of a six-hole photonic crystal fiber (PCF) with a silver nanowire. A liquid mixture (ethanol and chloroform) with a large thermo-optic coefficient is filled into the PCF holes as sensing medium. The filled silver nanowires can support resonance peaks and the peak will shift when temperature variations induce changes in the refractive indices of the mixture. By measuring the peak shift, the temperature change can be detected. The resonance peak is extremely sensitive to temperature because the refractive index of the filled mixture is close to that of the PCF material. Our numerical results indicate that a temperature sensitivity as high as 4 nm/K can be achieved and that the most sensitive range of the sensor can be tuned by changing the volume ratios of ethanol and chloroform. Moreover, the maximal sensitivity is relatively stable with random filled nanowires, which will be very convenient for the sensor fabrication.
An H-shaped photonic crystal fiber (PCF)-based surface plasmon resonance (SPR) sensor is proposed for detecting large refractive index (RI) range which can either be higher or lower than the RI of the fiber material used. The grooves of the H-shaped PCF as the sensing channels are coated with gold film and then brought into direct contact with the analyte, which not only reduces the complexity of the fabrication but also provides reusable capacity compared with other designs. The sensing performance of the proposed sensor is investigated by using the finite element method. Numerical results show that the sensor can work normally in the large analyte RI (n a ) range from 1.33 to 1.49, and reach the maximum sensitivity of 25,900 nm/RIU (RI units) at the n a range 1.47-1.48. Moreover, the sensor shows good stability in the tolerances of ±10% of the gold-film thickness.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.