The capability for multisite stimulation is one of the biggest potential advantages of microelectrode arrays (MEAs). There remain, however, several technical problems which have hindered the development of a practical stimulation system. An important design goal is to allow programmable multisite stimulation, which produces minimal interference with simultaneous extracellular and patch or whole cell clamp recording. Here, we describe a multisite stimulation and recording system with novel interface circuit modules, in which preamplifiers and transistor transistor logic-driven solid-state switching devices are integrated. This integration permits PC-controlled remote switching of each substrate electrode. This allows not only flexible selection of stimulation sites, but also rapid switching of the selected sites between stimulation and recording, within 1.2 ms. This allowed almost continuous monitoring of extracellular signals at all the substrate-embedded electrodes, including those used for stimulation. In addition, the vibration-free solid-state switching made it possible to record whole-cell synaptic currents in one neuron, evoked from multiple sites in the network. We have used this system to visualize spatial propagation patterns of evoked responses in cultured networks of cortical neurons. This MEA-based stimulation system is a useful tool for studying neuronal signal processing in biological neuronal networks, as well as the process of synaptic integration within single neurons.

A highly conductive textile was woven from nano-fibers coated with the PEDOT-PSS polymer. The aim of this study was to assess the usefulness of textile electrodes for ECG recording as a smart garment. Electrode textile pads and lead wires were sewn to the lining of sportswear and their tolerability to repeated washings were tested up to 150 times. The electrical conductivity of the textile electrode remained functional for up to 50 machine washes. To assess the level of motion artifacts or noise during the daily monitoring of ECG, a single lead ECG with conventional or textile electrodes was recorded during supine rest, seated rest, upright trunk rotation (i.e., twisting), and stepping movement in 66 healthy adults. A Holter system was used for data storage and analysis. ECG patterns of P, QRS, and T waves were comparable between the conventional and textile electrodes. However, the signal-to-artifact-and/or-noise ratio (SAR) during twisting was larger in the textile electrodes than in the conventional electrodes. No skin irritation was seen in the textile electrodes. The single lead textile electrodes embedded in an inner garment were usable for continuous and/or repeated ECG monitoring in daily life except during vigorous trunk movement.

The mechanosensitivity of neurons in the central nervous system (CNS) is an interesting issue as regards understanding neuronal development and designing compliant materials as neural interfaces between neurons and external devices for treating CNS injuries and disorders. Although neurite initiation from a cell body is known to be the first step towards forming a functional nervous network during development or regeneration, less is known about how the mechanical properties of the extracellular microenvironment affect neuritogenesis. Here, we investigated the filamentous actin (F-actin) cytoskeletal structures of neurons, which are a key factor in neuritogenesis, on gel substrates with a stiffness-controlled substrate, to reveal the relationship between substrate stiffness and neuritogenesis. We found that neuritogenesis was significantly suppressed on a gel substrate with an elastic modulus higher than the stiffness of in vivo brain. Fluorescent images of the F-actin cytoskeletal structures showed that the F-actin organization depended on the substrate stiffness. Circumferential actin meshworks and arcs were formed at the edge of the cell body on the stiff gel substrates unlike with soft substrates. The suppression of F-actin cytoskeleton formation improved neuritogenesis. The results indicate that the organization of neuronal F-actin cytoskeletons is strongly regulated by the mechanical properties of the surrounding environment, and the mechanically-induced F-actin cytoskeletons regulate neuritogenesis.

Microfabricated mobile electrodes, nanopallets, designed to provide adherent cells with electrical stimulation are reported. Nanopallets composed of a cross‐linked silk fibroin hydrogel matrix incorporated with poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) are used. The silk fibroin composite is characterized not only by mechanical and electrical conductive properties, but also by its optical transparency in both the visible and ultraviolet regions, and by its biocompatibility with adherent cells. It is demonstrated that the adherent cells, including normal cell‐lined cells and primary neuronal cells, loaded on the nanopallets can be manipulated while faithfully retaining their adhesive properties. By applying voltages via the nanopallets, the voltage‐dependent calcium channels expressed in the cells are selectively stimulated, and this is confirmed by using confocal fluorescent microscopy during manipulation and performing multiangle observations. These features are attributed to both the mobile operation of the transparent nanopallets, and the ability to simultaneously measure electrical signals and perform fluorescent observations.

No abstract