No abstract

No abstract

No abstract

The purpose of this study was to identify stable metal based counter electrodes (CE) for dye solar cells (DSC). Previous studies have shown that stainless steel (StS 304) suffers from corrosion when used as a counter electrode. Therefore metals which have inherently higher corrosion resistance, such as stainless steel types 321, 316 and 316L, Inconel 600 and titanium, were investigated here. When using thermal platinization for the preparation of the catalyst layer on CE, only the titanium foil based metal based DSC remained consistently stable in the 1000 h light soaking test. The counter electrodes were also prepared with sputtering ~20 nm thick layer of Pt which provides a highly uniform layer on the CE which acts also as a protective coating on the metal. With sputtered Pt, DSC on all studied metals expect for Inconel remained at 80-95 % of the initial efficiency after light soaking test for 1000 h.

The electrochemical mechanisms and performance of a symmetrical low-temperature SOFC with a single oxide as the electrolyte are investigated here.