Iron aluminides have been among the most studied intermetallics since the 1930s, when their excellent oxidation resistance was first noticed. Their low cost of production, low density, high strength-to-weight ratios, good wear resistance, ease of fabrication and resistance to high temperature oxidation and sulfurization make them very attractive as a substitute for routine stainless steel in industrial applications. Furthermore, iron aluminides allow for the conservation of less accessible and expensive elements such as nickel and molybdenum. These advantages have led to the consideration of many applications, such as brake disks for windmills and trucks, filtration systems in refineries and fossil power plants, transfer rolls for hot-rolled steel strips, and ethylene crackers and air deflectors for burning high-sulfur coal. A wide application for iron aluminides in industry strictly depends on the fundamental understanding of the influence of (i) alloy composition; (ii) microstructure; and (iii) number (type) of defects on the thermo-mechanical properties. Additionally, environmental degradation of the alloys, consisting of hydrogen embrittlement, anodic or cathodic dissolution, localized corrosion and oxidation resistance, in different environments should be well known. Recently, some progress in the development of new micro-and nano-mechanical testing methods in addition to the fabrication techniques of micro-and nano-scaled samples has enabled scientists to resolve more clearly the effects of alloying elements, environmental items and crystal structure on the deformation behavior of alloys. In this paper, we will review the extensive work which has been done during the last decades to address each of the points mentioned above.

No abstract

Hard and wear resistant coatings are widely used as tribological layers to protect tools from wear, oxidation and corrosion. Characterizing the deformation behavior of coatings is essential for understanding wear mechanisms and to design multi-layered coatings that withstand severe working conditions. Micro-mechanical properties of Ti(C,N) and Zr(C,N) coatings deposited by chemical vapor deposition on a WC-Co cemented carbide substrate were examined by micro-compression testing using a nanoindenter equipped with a flat punch. Scanning Electron Microscopy, Focused Ion Beam, Electron Backscattered Diffraction and Finite Element Modeling were combined to analyze the deformation mechanisms of the carbonitride layers at room temperature. The results revealed that Ti(C,N) undergoes

No abstract

PurposeThis study aims to evaluate the influence of pulsed cathodic protection on calcareous deposit formation on structures submerged in the synthetic sea water.Design/methodology/approachChronoamperometric and CHF methods have been used to evaluate the influence of pulsed cathodic protection on decreasing the required cathodic current for protection and also decreasing the surface coverage. The morphology of the formed deposits was evaluated using scanning electron microscopy. Chemical analyses of the formed deposits were performed using energy dispersive X‐ray spectrometer and X‐ray diffraction.FindingsIt was observed that pulse frequency influenced both the structure and the composition of the deposits. The most compact aragonite layer was obtained at high frequencies and at a high off‐time. It was clearly shown that by applying currents with less than 100 Hz frequency, the deposits formed on the sample involved CaCO3 (aragonite) and Mg(OH)2 (brucite). However, the kinetics of deposits formed when applying pulse current have been improved, compared to deposits formed by conventional cathodic protection. The reason is that large electrode overpotential favors nucleation through a decrease in the energy of nucleus formation. On the other hand, by intensive decrease of surface potential, repulsion of aggressive anions such as SO42− and Cl− occurs. These anions inhibit the formation of aragonite deposits.Research limitations/implicationsIn order to have a better investigation of electrodeposition processes in the shorter time, the use of more advanced techniques and analysis methods such as XPS is recommended. Furthermore, EHD techniques could be used for measurements of thickness of the layers.Practical implicationsThe pulsed cathodic protection method is a relatively new method for the protection of buried and submerged structures. Recently, many researches have investigated that the influence of this technique on increasing the throwing power, decreasing interference effects on neighboring structures and increasing the uniformity of current distribution under cathodic protection.Originality/valueVery little attention has been paid in the past to the effect of pulsed CP on deposit formation. The present paper, therefore, contributes useful understanding of the mechanism and advantages of such deposits in improving the effectiveness and lowering the operational cost of cathodic protection in use on offshore structures.