Purpose To apply a simple and flexible manufacturing technique, two-photon polymerisation (2PP), to the fabrication of microneedle (MN) array templates with high precision and low cost in a short time. Methods Seven different MN array templates were produced by 2PP 3D printing, varying needle height (900–1300 μm), shape (conical, pyramidal, cross-shaped and with pedestal), base width (300–500 μm) and interspacing (100–500 μm). Silicone MN array moulds were fabricated from these templates and used to produce dissolving and hydrogel-forming MN arrays. These polymeric MN arrays were evaluated for their insertion in skin models and their ability to deliver model drugs (cabotegravir sodium and ibuprofen sodium) to viable layers of the skin (ex vivo and in vitro) for subsequent controlled release and/or absorption. Results The various templates obtained with 2PP 3D printing allowed the reproducible fabrication of multiple MN array moulds. The polymeric MN arrays produced were efficiently inserted into two different skin models, with sharp conical and pyramidal needles showing the highest insertion depth values (64–90% of needle height). These results correlated generally with ex vivo and in vitro drug delivery results, where the same designs showed higher drug delivery rates after 24 h of application. Conclusion This work highlights the benefits of using 2PP 3D printing to prototype variable MN array designs in a simple and reproducible manner, for their application in drug delivery.

Cochlear hair cells are critical for the conversion of acoustic into electrical signals and their dysfunction is a primary cause of acquired hearing impairments, which worsen with aging. Piezoelectric materials can reproduce the acoustic-electrical transduction properties of the cochlea and represent promising candidates for future cochlear prostheses. The majority of piezoelectric hearing devices so far developed are based on thin films, which have not managed to simultaneously provide the desired flexibility, high sensitivity, wide frequency selectivity, and biocompatibility. To overcome these issues, we hypothesized that fibrous membranes made up of polymeric piezoelectric biocompatible nanofibers could be employed to mimic the function of the basilar membrane, by selectively vibrating in response to different frequencies of sound and transmitting the resulting electrical impulses to the vestibulocochlear nerve. In this study, poly(vinylidene fluoride-trifluoroethylene) piezoelectric nanofiber-based acoustic circular sensors were designed and fabricated using the electrospinning technique. The performance of the sensors was investigated with particular focus on the identification of the resonance frequencies and acoustic-electrical conversion in fibrous membrane with different size and fiber orientation. The voltage output (1–17 mV) varied in the range of low resonance frequency (100–400 Hz) depending on the diameter of the macroscale sensors and alignment of the fibers. The devices developed can be regarded as a proof-of-concept demonstrating the possibility of using piezoelectric fibers to convert acoustic waves into electrical signals, through possible synergistic effects of piezoelectricity and triboelectricity. The study has paved the way for the development of self-powered nanofibrous implantable auditory sensors.

Please cite this article as: Jomaa MH, Seveyrat L, Lebrun L, Masenelli-Varlot K, Cavaille JY, Dielectric properties of segmented polyurethanes for electromechanical applications, Polymer (2015), AbstractThe paper deals with electromechanical and dielectric properties of polyurethanes (PU) blockcopolymers. Most of the works published in the literature only consider electrostriction at room temperature at a given frequency. In this work, it is shown that electrostrictive coefficient M E is divided by 3 to 10 at increasing frequency over 3 decades of frequency, depending on the ratio of hard to soft segments in PU. Thus it is important to analyze the energy conversion efficiency by investigating the dielectric and viscoelastic properties. This work is divided into two parts. The first oneThis work deals with the study of dielectric properties of 3 PU with different fractions of hard segments. Three relaxation phenomena (β, α and conduction) were investigated for each PU in the temperature-frequency range studied here, in order to optimize the copolymer composition in view of their best efficiency as actuators or mechanical energy harvesting devices. Part 2 will analyze the effect of viscoelastic properties on electrostriction efficiency.