In the past few years, hybrid organic-inorganic and all-inorganic metal halide perovskite nanocrystals have become one of the most interesting materials for optoelectronic applications. Here, we report a facile and rapid room temperature synthesis of 15-25 nm formamidinium CH(NH)PbX (X = Cl, Br, I, or mixed Cl/Br and Br/I) colloidal nanocrystals by ligand-assisted reprecipitation (LARP). The cubic and platelet-like nanocrystals with their emission in the range of 415-740 nm, full width at half-maximum (fwhm) of 20-44 nm, and radiative lifetimes of 5-166 ns enable band gap tuning by halide composition as well as by their thickness tailoring; they have a high photoluminescence quantum yield (up to 85%), colloidal and thermodynamic stability. Combined with surface modification that prevents degradation by water, this nanocrystalline material is an ideal candidate for optoelectronic devices and applications. In addition, optoelectronic measurements verify that the photodetector based on FAPbI nanocrystals paves the way for perovskite quantum dot photovoltaics.

With the aim of utilizing the infrared region of solar radiation to improve solar cell performance, significant progress, including theoretical analysis and experimental achievement, has been made in the field of up-conversion for photovoltaic applications. This Research News article reviews recent progress in the development of rear-earth (RE) ion doped up-conversion materials for solar cell applications. In addition, new trends for RE-ion-doped phosphors are briefly discussed, among them trivalent RE-ion-doped up-conversion materials for organic solar cell applications.

White‐LEDs are produced with the addition of a silicone‐composite layer containing light‐emitting converter material on top of a high‐performance blue‐LED chip. The color reproduction was significantly improved in comparison with commercially available white‐LEDs.

As they combine decent mobilities with extremely long carrier lifetimes, organic-inorganic perovskites have opened a whole new field in optoelectronics. Measurements of their underlying electronic structure, however, are still lacking. Using angle-resolved photoelectron spectroscopy, we measure the valence band dispersion of single-crystal CH3NH3PbBr3. The dispersion of the highest energy band is extracted applying a modified leading edge method, which accounts for the particular density of states of organic-inorganic perovskites. The surface Brillouin zone is consistent with bulk-terminated surfaces both in the low-temperature orthorhombic and the high-temperature cubic phase. In the low-temperature phase, we find a ring-shaped valence band maximum with a radius of 0.043Å −1 , centered around a 0.16 eV deep local minimum in the dispersion of the valence band at the high-symmetry point. Intense circular dichroism is observed. This dispersion is the result of strong spin-orbit coupling. Spin-orbit coupling is also present in the room-temperature phase. The coupling strength is one of the largest reported so far.

Sustainable biomass production is expected to be one of the major supporting pillars for future energy supply, as well as for renewable material provision. Algal beds represent an exciting resource for biomass/biofuel, fine chemicals and CO 2 storage. Similar to other solar energy harvesting techniques, the efficiency of algal photosynthesis depends on the spectral overlap between solar irradiation and chloroplast absorption. Here we demonstrate that spectral conversion can be employed to significantly improve biomass growth and oxygen production rate in closed-cycle algae reactors. For this purpose, we adapt a photoluminescent phosphor of the type Ca 0.59 Sr 0.40 Eu 0.01 S, which enables efficient conversion of the green part of the incoming spectrum into red light to better match the Q y peak of chlorophyll b. Integration of a Ca 0.59 Sr 0.40 Eu 0.01 S backlight converter into a flat panel algae reactor filled with Haematococcus pluvialis as a model species results in significantly increased photosynthetic activity and algae reproduction rate.