Existing reinforced concrete (RC) bridges that were designed in the decades between 1950 and 1990 exhibit inadequate structural safety with reference to both traffic loads and hazard conditions. Competent authorities are planning extensive inspections to collect data about these structures and to address retrofit interventions. In this context, Remotely Piloted Aircraft Systems (RPASs) represent a prospect to facilitate in-situ inspections, reducing time, cost and risk for the operators. A practice-oriented methodology to perform RPAS-based surveys is described. After that, a workflow to perform an in-situ RPAS inspection oriented to a photogrammetric data extraction is discussed. With the aim to connect the advantages of the RPAS technologies to the seismic risk assessment of bridges, a simplified mechanic-based procedure is described, oriented to map the structural risk in road networks and support prioritization strategies. A six-span RC bridge of the Basilicata road network, representing a typical Italian bridge typology is selected to practically describe the operating steps of the RPAS inspection and of the simplified seismic risk assessment approach.
A wide range of industrial applications benefits from the accessibility of image-based techniques for three-dimensional modelling of different multi-scale objects. In the last decade, along with the technological progress mainly achieved with the use of Unmanned Aerial Vehicles (UAVs), there has been an exponential growth of software platforms enabled to return photogrammetric products. On the other hand, the different levels of final product accuracy resulting from the adoption of different processing approaches in various softwares have not yet been fully understood. To date, there is no validation analysis in literature focusing on the comparability of such products, not even in relation to the use of workflows commonly allowed inside various software platforms. The lack of detailed information about the algorithms implemented in the licensed platforms makes the whole interpretation even more complex. This work therefore aims to provide a comparative evaluation of three photogrammetric softwares commonly used in the industrial field, in order to obtain coherent, if not exactly congruent results. After structuring the overall processing workflow, the processing pipelines were accurately parameterized to make them comparable in both licensed and open-source softwares. For the best interpretation of the results derived from the generation of point clouds processed by the same image dataset, the obtainable values of root-mean-square error (RMSE) were analyzed, georeferencing models as the number of GCPs varied. The tests carried out aimed at investigating the elements shared by the platforms tested, with the purpose of supporting future studies to define a unique index for the accuracy of final products.
Remotely piloted aerial systems (RPAS) have been recognized as an effective low-cost tool to acquire photogrammetric data of low accessible areas reducing collection and processing time. Data processing techniques like structure from motion (SfM) and multiview stereo (MVS) techniques, can nowadays provide detailed 3D models with an accuracy comparable to the one generated by other conventional approaches. Accuracy of RPAS-based measures is strongly dependent on the type of adopted sensors. Nevertheless, up to now, no investigation was done about relationships between camera calibration parameters and final accuracy of measures. In this work, authors tried to fill this gap by exploring those dependencies with the aim of proposing a prediction function able to quantify the potential final error in respect of camera parameters. Predictive functions were estimated by combining multivariate and linear statistical techniques. Four photogrammetric RPAS acquisitions were considered, supported by ground surveys, to calibrate the predictive model while a further acquisition was used to test and validate it. Results are preliminary, but promising. The calibrated predictive functions relating camera internal orientation (I.O.) parameters with final accuracy of measures (root mean squared error) showed high reliability and accuracy.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.