No abstract

The main aim of the paper is to present the process of design pipe inspection mobile robot by using 3D simulations. Next methods and processes of making designed components was described. Finally, functional tests of a constructed real robot model such as speed tests, inclined pipe test was carried out. The robot was specifically designed to inspect sewer pipelines. The mobile robot is equipped with a vision system. The structure of the pipe inspection robot allows adjustments to the geometrical parameters of the robot to suit the sewer pipes diameters by using in the construction of a pneumatic system with an actuator.

No abstract

The article presents issues related to an experimental study of the vibrations of a roller shutter gripper on a robotic palletizing station. The authors presented the developed and built construction of the gripper for handling whole layers of products, separators, and pallets. The concept of the device was developed in cooperation with an integrator company. The authors verified the functionality of the gripper in a virtual environment for modeling and programming industrial robots. After the gripper was manufactured and the control software was developed for it, functional tests and inertia tests were carried out. The main purpose of the tests was to determine the vibration of the robot’s flange and the vibration of the attached gripper. Tests of the gripper’s properties on the robotic test bench were performed using MTi XSENS sensors and a PHANTOM V210 high-speed camera. The testing methodology proposed by the authors made it possible to confirm the occurrence of vibrations in the structure and to determine the relationship between the parameters of the robot’s motion (velocity and acceleration) and the magnitude of the vibrations occurring. During the tests, a disturbance in the decrease in the maximum value of acceleration was noted. This may be due to the appearance of natural vibrations in the structure. They have a damped character; however, they are not steady. In future work, the authors will focus on the possibility of using the proposed methodology to reduce robot vibrations in selected robotic production processes (such as spot welding).

The paper presents the identification process of the mathematical model parameters of a differential-drive two-wheeled mobile robot. The values of the unknown parameters of the dynamics model were determined by carrying out their identification offline with the Levenberg-Marguardt method and identification online with the Recursive least-squares method. The authors compared the parameters identified by offline and online methods and proposed to support the recursive least squares method with the results obtained by offline identification. The correctness of the identification process of the robot dynamics model parameters, and the operation of the control system was verified by comparing the desired trajectories and those obtained through simulation studies and laboratory tests. Then an analysis of errors defined as the difference between the values of reference position, orientation and velocity, and those obtained from simulations and laboratory tests was carried out. On itd basis, the quality of regulation in the proposed algorithm was determined.