The performances of heterojunction-based electronic devices are extremely sensitive to the interfacial electronic band structure. Here we report a largely enhanced performance of photoelectrochemical (PEC) photoanodes by ferroelectric polarization-endowed band engineering on the basis of TiO2/BaTiO3 core/shell nanowires (NWs). Through a one-step hydrothermal process, a uniform, epitaxial, and spontaneously poled barium titanate (BTO) layer was created on single crystalline TiO2 NWs. Compared to pristine TiO2 NWs, the 5 nm BTO-coated TiO2 NWs achieved 67% photocurrent density enhancement. By numerically calculating the potential distribution across the TiO2/BTO/electrolyte heterojunction and systematically investigating the light absorption, charge injection and separation properties of TiO2 and TiO2/BTO NWs, the PEC performance gain was proved to be a result of the increased charge separation efficiency induced by the ferroelectric polarization of the BTO shell. The ferroelectric polarization could be switched by external electric field poling and yielded PEC performance gain or loss based on the direction of the polarization. This study evidence that the piezotronic effect (ferroelectric or piezoelectric potential-induced band structure engineering) holds great promises in improving the performance of PEC photoelectrodes in addition to chemistry and structure optimization.

Piezocatalysis uses piezopotential to modulate charge carrier energetics (see picture), thus allowing the direct enhancement or suppression of electrochemical reactions that occur at a piezoelectric material/solution interface. Such a direct conversion of mechanical to chemical energy is shown by the electrochemical H2 evolution that is achieved by straining a piezoelectric material in aqueous medium.

To date, the preparation of free-standing 2D nanomaterials has been largely limited to the exfoliation of van der Waals solids. The lack of a robust mechanism for the bottom-up synthesis of 2D nanomaterials from non-layered materials has become an obstacle to further explore the physical properties and advanced applications of 2D nanomaterials. Here we demonstrate that surfactant monolayers can serve as soft templates guiding the nucleation and growth of 2D nanomaterials in large area beyond the limitation of van der Waals solids. One- to 2-nm-thick, single-crystalline free-standing ZnO nanosheets with sizes up to tens of micrometres are synthesized at the water–air interface. In this process, the packing density of surfactant monolayers adapts to the sub-phase metal ions and guides the epitaxial growth of nanosheets. It is thus named adaptive ionic layer epitaxy (AILE). The electronic properties of ZnO nanosheets and AILE of other materials are also investigated.

Recently, the strain state of a piezoelectric electrode has been found to impact the electrochemical activity taking place between the piezoelectric material and its solution environment. This effect, dubbed piezocatalysis, is prominent in piezoelectric materials because the strain state and electronic state of these materials are strongly coupled. Herein we develop a general theoretical analysis of the piezocatalysis process utilizing well-established piezoelectric, semiconductor, molecular orbital and electrochemistry frameworks. The analysis shows good agreement with experimental results, reproducing the time-dependent voltage drop and H2 production behaviors of an oscillating piezoelectric Pb(Mg1/3Nb2/3)O3-32PbTiO3 (PMN-PT) cantilever in deionized water environment. This study provides general guidance for future experiments utilizing different piezoelectric materials, such as ZnO, BaTiO3, PbTiO3, and PMN-PT. Our analysis indicates a high piezoelectric coupling coefficient and a low electrical conductivity are desired for enabling high electrochemical activity; whereas electrical permittivity must be optimized to balance piezoelectric and capacitive effects.

Through a process of photoelectrochemical (PEC) water splitting, we demonstrated an effective strategy for engineering the barrier height of a heterogeneous semiconductor interface by piezoelectric polarization, known as the piezotronic effect. A consistent enhancement or reduction of photocurrent was observed when tensile or compressive strains were applied to the ZnO anode, respectively. The photocurrent variation is attributed to a changed barrier height at the ZnO/ITO interface, which is a result of the remnant piezoelectric potential across the interface due to a nonideal free charge distribution in the ITO electrode. In our system, ∼1.5 mV barrier height change per 0.1% applied strain was identified, and 0.21% tensile strain yielded a ∼10% improvement of the maximum PEC efficiency. The remnant piezopotential is dictated by the screening length of the materials in contact with piezoelectric component. The difference between this time-independent remnant piezopotential effect and time-dependent piezoelectric effect is also studied in details.