High-resolution topographic surveying is traditionally associated with high capital and logistical costs, so that data acquisition is often passed on to specialist third party organizations. The high costs of data collection are, for many applications in the earth sciences, exacerbated by the remoteness and inaccessibility of many field sites, rendering cheaper, more portable surveying platforms (i.e. terrestrial laser scanning or GPS) impractical. This paper outlines a revolutionary, low-cost, userfriendly photogrammetric technique for obtaining high-resolution datasets at a range of scales, termed 'Structure-from-Motion' (SfM). Traditional softcopy photogrammetric methods require the 3-D location and pose of the camera(s), or the 3-D location of ground control points to be known to facilitate scene triangulation and reconstruction. In contrast, the SfM method solves the camera pose and scene geometry simultaneously and automatically, using a highly redundant bundle adjustment based on matching features in multiple overlapping, offset images. A comprehensive introduction to the technique is presented, followed by an outline of the methods used to create high-resolution Digital Elevation Models (DEMs) from extensive photosets obtained using a consumer-grade digital camera. As an initial appraisal of the technique, an SfM-derived DEM is compared directly with a similar model obtained using Terrestrial Laser Scanning. This intercomparison reveals that decimetre-scale vertical accuracy can be achieved using SfM even for sites with complex topography and a range of land-covers. Example applications of SfM are presented for three contrasting landforms across a range of scales including; an exposed rocky coastal cliff; a breached moraine-dam complex; and a glaciallysculpted bedrock ridge. The SfM technique represents a major advancement in the field of photogrammetry for geoscience applications. Our results and experiences indicate SfM is an inexpensive, effective, and flexible approach to capturing complex topography.

No abstract

Westoby, M. J., Glasser, N. F., Brasington, J., Hambrey, M. J., Quincey, D. J., Reynolds, J. M. (2014). Modelling outburst floods from moraine-dammed glacial lakes. Earth-Science Reviews, 134, 137-159 Embargoed: 3.4.15In response to climatic change, the size and number of moraine-dammed supraglacial and proglacial lake systems have increased dramatically in recent decades. Given an appropriate trigger, the natural moraine dams that impound these proglacial lakes are breached, producing catastrophic Glacial Lake Outburst Floods (GLOFs). These floods are highly complex phenomena, with flood characteristics controlled, in the first instance, by the style of breach formation. Downstream, GLOFs typically exhibit transient, often non-Newtonian fluid dynamics as a result of high rates of sediment entrainment from the dam structure and channel boundaries. Combined, these characteristics introduce numerous modelling challenges. In this review, the historical, contemporary and emerging approaches available to model the individual stages, or components, of a GLOF event are introduced and discussed. A number of methods exist to model the stages of a GLOF event. Dam-breach models can be categorised as being empirical, analytical or numerical in nature, with each method having significant advantages and shortcomings. Empirical relationships that produce estimates of peak discharge and time to peak are straightforward to implement, but the applicability of these models is often limited by the nature of the case study data from which they are derived. Furthermore, empirical models neglect the inclusion of basic hydraulic principles that describe the mechanics of breach formation. Analytical or parametric models simulate breach development using simplified versions of the physically based equations that describe breach enlargement, whilst complex, physically-based codes represent the state-of-the-art in numerical dam-breach modelling. To date, few of the latter have been applied to investigate the moraine-dam failure problem. Despite significant advances in the physical complexity and availability of higher-order hydrodynamic solvers, the majority of published accounts that have attempted to reconstruct or predict GLOF characteristics have been limited, often by necessity, to the use of relatively simplistic models. This is in part attributable to the unavailability of terrain models of many high-mountain catchments at the fine spatial resolutions required for the effective application of numerically-sophisticated codes, and their proprietary (and often cost-prohibitive) nature. However, advanced models are experiencing increasing use in the glacial hazards literature. In particular, the suitability of emerging mesh-free, particle-based methods for simulating dam-breach and GLOF routing may represent a solution to many of the challenges associated with modelling this complex phenomenon. Sources of uncertainty in the GLOF modelling chain have been identified by various workers. However, to date their significance for the robustnes...

Modes of debris entrainment and subsequent transfer in seven “normal” and five surge-type glaciers in Svalbard (76–79° N) are outlined in the context of the structural evolution of a glacier as the ice deforms during flow. Three main modes of entrainment and transfer are inferred from structural and sedimentological observations: (i) The incorporation of angular rockfall material within the stratified sequence of snow/firn/superimposed ice. This debris takes an englacial path through the glacier, becoming folded. At the margins and at the boundaries of flow units the stratified ice including debris is strongly folded, so that near the snout the debris emerges at the surface on the hinges and limbs of the folds, producing medial moraines which merge towards the snout. The resulting lines of debris are transmitted to the proglacial area in the form of regular trains of angular debris. (ii) Incorporation of debris of both supraglacial and basal character within longitudinal foliation. This is particularly evident at the surface of the glacier at the margins or at flow unit boundaries. It can be sometimes demonstrated that foliation is a product of strong folding, since it usually has an axial planar relationship with folded stratification. Foliation-parallel debris thus represents a more advanced stage of deformation than in (i). Although the presence of basal debris is problematic, it is proposed that this material is tightly folded ice derived from the bed in the manner of disharmonie folding. The readily deformed subglacial sediment or bedrock surface represents the plane of décollement. (iii) Thrusting, whereby debris-rich basal ice (including regelation ice) and subglacial sediments are uplifted into an englacial position, sometimes emerging at the ice surface. This material is much more variable in character than that derived from rockfalls, and reflects the substrate lithologies; diamicton with striated clasts and sandy gravels are the most common facies represented. Thrusting is a dynamic process, and in polythermal glaciers is probably linked mainly to the transition from sliding to frozen bed conditions. It is not therefore a solely ice-marginal or proglacial process.