Electrochemical capacitors (ECs) that store charge based on the pseudocapacitive mechanism combine high energy densities with high power densities and rate capabilities. 2D transition metal carbides (MXenes) have been recently introduced as high‐rate pseudocapacitive materials with ultrahigh areal and volumetric capacitances. So far, 20 different MXene compositions have been synthesized and many more are theoretically predicted. However, since most MXenes are chemically unstable in their 2D forms, to date only one MXene composition, Ti3C2Tx, has shown stable pseudocapacitive charge storage. Here, a cation‐driven assembly process is demonstrated to fabricate highly stable and flexible multilayered films of V2CTx and Ti2CTx MXenes from their chemically unstable delaminated single‐layer flakes. The electrochemical performance of electrodes fabricated using assembled V2CTx flakes surpasses Ti3C2Tx in various aqueous electrolytes. These electrodes show specific capacitances as high as 1315 F cm−3 and retain ≈77% of their initial capacitance after one million charge/discharge cycles, an unprecedented performance for pseudocapacitive materials. This work opens a new venue for future development of high‐performance supercapacitor electrodes using a variety of 2D materials as building blocks.

Label-free nanopore technology for sequencing biopolymers such as DNA and RNA could potentially replace existing methods if improvements in cost, speed, and accuracy are achieved. Solid-state nanopores have been developed over the past two decades as physically and chemically versatile sensors that mimic biological channels, through which transport and sequencing of biomolecules have already been demonstrated. Of particular interest is the use of two-dimensional (2D) materials as nanopore substrates, since these can in theory provide the highest resolution readout (<1 nm of a biopolymer segment) and opportunities for electronic multiplexed readout through their interesting electronic properties. In this work, we report on nanopores comprising atomically thin flakes of 2D transition metal carbides called MXenes. We demonstrate a high-yield (60%), contamination-free, and alignment-free transfer method that involves their self-assembly at a liquid−liquid interface to large-scale (mm-sized) films composed of sheets, followed by nanopore fabrication using focused electron beams. Our work demonstrates the feasibility of MXenes, a class of hydrophilic 2D materials with over 20 compositions known to date, as nanopore membranes for DNA translocation and single-molecule sensing applications.

Nanopore-based sensors are advancing the sensitivity and selectivity of single-molecule detection in molecular medicine and biotechnology. Current electrical sensing devices are based on either membrane protein pores supported in planar lipid bilayers or solid-state (SS) pores fabricated in thin metallic membranes. While both types of nanosensors have been used in a variety of applications, each has inherent disadvantages that limit its use. Hybrid nanopores, consisting of a protein pore supported within a SS membrane, combine the robust nature of SS membranes with the precise and simple engineering of protein nanopores. We demonstrate here a novel lipid-free hybrid nanopore comprising a natural DNA pore from a thermostable virus, electrokinetically inserted into a larger nanopore supported in a silicon nitride membrane. The hybrid pore is stable and easy to fabricate, and, most importantly, exhibits low peripheral leakage allowing sensing and discrimination among different types of biomolecules.

No abstract

Bottom-up assembly of two-dimensional (2D) materials into macroscale morphologies with emergent properties requires control of the material surroundings, so that energetically favorable conditions direct the assembly process. MXenes, a class of recently developed 2D materials, have found new applications in areas such as electrochemical energy storage, nanoscale electronics, sensors, and biosensors. In this report, we present a lateral self-assembly method for wafer-scale deposition of a mosaic-type 2D MXene flake monolayers that spontaneously order at the interface between two immiscible solvents. Facile transfer of this monolayer onto a flat substrate (Si, glass) results in high-coverage (>90%) monolayer films with uniform thickness, homogeneous optical properties, and good electrical conductivity. Multiscale characterization of the resulting films reveals the mosaic structure and sheds light on the electronic properties of the films, which exhibit good conductivity over cm-scale areas.