Perovskite surface treatment with additives has been reported to improve charge extraction, stability, and/or surface passivation. In this study, treatment of a 3D perovskite ((FAPbI 3 ) 1−x (MAPbBr 3 ) x ) layer with a thienothiophene-based organic cation (TTMAI), synthesized in this work, is investigated. Detailed analyses reveal that a 2D (n = 1) or quasi-2D layer does not form on the PbI 2rich surface 3D perovskite. TTMAI-treated 3D perovskite solar cells (PSCs) fabricated in this study show improved fill factors, providing an increase in their power conversion efficiencies (PCEs) from 17% to over 20%. It is demonstrated that the enhancement is due to better hole extraction by drift-diffusion simulations. Furthermore, thanks to the hydrophobic nature of the TTMAI, PSC maintains 82% of its initial PCE under 15% humidity for over 380 h (the reference retains 38%). Additionally, semitransparent cells are demonstrated reaching 17.9% PCE with treated 3D perovskite, which is one of the highest reported efficiencies for double cationic 3D perovskites. Moreover, the semitransparent 3D PSC (TTMAI-treated) maintains 87% of its initial efficiency for six weeks (>1000 h) when kept in the dark at room temperature. These results clearly show that this study fills a critical void in perovskite research where highly efficient and stable semitransparent perovskite solar cells are scarce.
The recent sky-rocketing performance of perovskite solar cells has triggered a strong interest in further upgrading the fabrication techniques to meet the scalability requirements of the photovoltaic industry. The integration of vapor-deposition into the solution process in a sequential fashion can boost the uniformity and reproducibility of the perovskite solar cells.Besides, mixed-halide perovskites have exhibited outstanding crystallinity as well as higher stability compared with iodide-only perovskite. An extensive study was carried out to identify a reproducible process leading to highly crystalline perovskite films that when integrated into solar cells exhibited high power conversion efficiency (max. 19.8%). This was achieved by optimizing the deposition rate of the PbI2 layer as well as by inserting small amounts of methylammonium (MA) bromide and chloride salts to the primary MAI salt in the solution-based conversion step.
3The optimum MABr/MAI molar ratio leading to the most efficient and stable solar cells was found to be 0.4. Stabilities were in excess of 90 hours for p-i-n type solar cells. This reproducible approach towards the fabrication of triple halide perovskites using a hybrid vapor-solution method is a promising method towards scalable production techniques.Recently, Rafizadeh et. al. used a hybrid vapor-solution method to fabricate planar MAPI-based devices with 18.9% efficiency in the n-i-p structure 26 . In that work, TiO2 was used as the Supporting Information.XRD, AFM, and, SEM of the PbI2 layer deposited at different rates, device statistical data depending on PbI2 deposition rate, XRD of MAPI-BrCl depending on MACl concentration, the effect of MABr/MAI ratio on the absorbance edge and on the Shockley-Queisser limit and average values of J-V parameters, stability analysis of the devices.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.