In this paper, a new LF/HF RFID reader loop antenna design is proposed and tested, in order to increase detection areas of the tags. The studied structure is a Twisted Loop Antenna (TLA) which is based on a modified distribution and orientation of the magnetic field lines. Our structure fruitfully uses the complementary antenna principle in a coplanar configuration. This offers more possibilities of tag detection whatever the tag position and orientation. The antenna performances are evaluated by optimizing the equivalent mutual inductance between reader antenna and tag antenna. Results are presented firstly in simulation (MATLAB and HFSS electromagnetic calculator) and secondly by experimental tests at different distances and misalignments, for the two possible tag orientations: parallel and perpendicular.
This letter focuses on 13.56 MHz high-frequency radio frequency identification (RFID) in the case of small tags detection, with an effective area below 1 cm 2. In such an identification system, based on load modulation principle, the magnetic coupling coefficient k and quality factor of the RFID reader coil are the key parameters. The main goal of this letter is to improve the detection of small tags over a given surface of 10 × 10 cm 2 by modifying the reader coil structure, and consequently the coupling coefficient k. Several coil designs are compared experimentally by distributing the diameters of their turns among three possible values. The design of the coils is based on empirical formulas that are in good agreement with experimental measurements. Electromagnetic simulations are performed to confirm the magnetic field distribution of the different designs. The results show that distributed diameter coil (DDC) as RFID reader coil is clearly efficient in this context of the RFID detection. The DDC structures determine the k factor, and, as k is low, the quality factor Q is a second parameter that can improve, in a second step, the RFID detection performances in function of the tag position and orientation.
In this work the improvement of HF RFID detection is obtained by the addition of small resonator in the reader coil. In conventional RFID system, the link between the reader and the tag coils is the mutual inductance, the added resonator is magnetically coupled with the reader coil, and then the link is expressed by the mutual impedance. Theoretical calculation of the equivalent mutual impedance of such system is reported and validated by comparison with HFSS simulation and measures.
Herein, a 3D 13, 56 MHz (HF) RFID reader antenna is proposed in order to optimize detection performance whatever the tag angular positioning. The design is made of a multi-loop structure, based on serial complementary antennas, as said "twisted" antennas. The RFID tag detection is optimized by two factors which rely on the modifications of the magnetic field (i) vectorial distribution and (ii) magnitude density. The reader antenna design is analyzed with electromagnetic simulation under HFSS (High Frequency Electromagnetic Field Simulation), and validated by detection measurements, in coplanar mode. A multi-loop structure, composed by 4 sub-loops, is then conformed onto a tube surface to provide the 3D structure. The goal of this improvement is to provide tag detection for any angular positions. At the center of the tube (3D reader structure), the detection of the tag is performed whatever its angular orientation, that is to say for any radial orientation.
In this article, HF RFID reader antenna including small resonant coil, operating with the magnetic coupling with the reader coil, is reported. The proposed system is used to improve surface and volume of small tag detection. The performances of such system are validated by maximization of input impedance (load modulation principle) and equivalent mutual inductance between the reader dual-coils and the tag coil compared to a conventional RFID reader antenna. Analytical formulas of theses parameters are developed. The proposed system is validated by detection measurements in parallel and perpendicular configurations between the reader and the tag coils.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.