The wake of a square cylinder is investigated for Reynolds number Re < 107. Two-dimensional (2D) laminar simulation and three-dimensional (3D) large-eddy simulation are conducted at Re ≤ 1.0 × 103, while experiments of hotwire, particle image velocimetry, and force measurements are carried out at a higher Re range of 1.0 × 103 < Re < 4.5 × 104. Furthermore, data covering a wide Re range, from 100 to 107, in the literature are comprehensively collected for discussion and comparison purposes. The dependence on Re of the recirculation bubble size or vortex formation length, wake width, shear-layer transition, time-mean drag force, and Strouhal number is discussed in detail, revealing five flow regimes, each having distinct variations of the above parameters. With increasing Re, while the streamwise recirculation size enlarges at Re < 50 (steady flow regime), the vortex formation length reduces at 50 < Re < 1.6 × 102 (laminar flow regime), remains unchanged at 1.6 × 102 < Re < 2.2 × 102 (2D-to-3D transition flow regime), and decreases at 2.2 × 102 < Re < 1 × 103 (shear layer transition I regime), approaching asymptotically a constant at Re > 1.0 × 103 (shear layer transition II regime). Meanwhile, the wake width decreases with Re in the laminar flow regime, grows in 2D-to-3D transition and shear layer transition I regimes, and levels off in the shear layer transition II regime. The narrowest wake width is identified in the 2D-to-3D transition flow regime, corresponding to a minimum time-mean drag force and a largest Strouhal number. With increasing Re, the shear-layer transition length rapidly declines in the shear layer transition I regime where the transition occurs downstream of the trailing corner of the cylinder. On the other hand, it slowly tapers off in the shear layer transition II regime where the transition takes place upstream of the trailing corner. An extensive comparison is made between the dependence on Re of a circular cylinder wake and a square cylinder wake, with their distinct natures highlighted.
A direct numerical simulation is applied to investigate three-dimensional unsteady flow characteristics around a finite wall-mounted square cylinder with an aspect ratio of 7 at a Reynolds number (Re) of 40-250. Determination of Re for the onset of vortex shedding and Re influence on the wake structure and integral parameters are the major objectives of the current research. The results show that the vortex shedding inception occurs within the range of 75 < Re < 85. Re has a considerable effect on the mean wake topology and integral parameters. As such, the wake flow changes from a dipole to a quadrupole type, when the flow changes from steady to unsteady. A transition flow commences at Re = 150-200, where the wake instabilities are intensified with increasing Re, and the force signal oscillation alters from a sinusoidal to a chaotic type. Finally, the wake flow becomes turbulent at Re > 200.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.