Plasticizers play a key role in the formulation of polymers and in determining their physical properties and processability. This study examines the effects of citrate esters, triethylcitrate, and triacetine as plasticizers on the thermal and mechanical properties of poly(methyl methacrylate). The samples were characterized by differential scanning calorimetry, dynamical mechanical analysis, and mechanical testing under different plasticizer contents. Both citrate esters proved to be effective as plasticizers, DSC data for the triacetine additive fits with Fox equation. Microstructure and relaxation properties were studied by dynamic mechanical analysis where loss modulus shows clearly that absorbed plasticizer shifts the a-transition to lower temperature and b-relaxations associated to ester side groups are unchanged even up to 30 wt % plasticizer. Mechanical properties were evaluated with an Instron testing machine. Both additives produced (1) an initial plasticization, with a decrease in tensile strength and modulus; (2) an antiplasticization, reflected as an increase in tensile strength; and modulus and (3) a final plasticization, with a notable decrease in tensile strength and modulus and an increase in elongation where a 35 wt % of triethylcitrate added to the poly(methyl methacrylate) increased in 200% its elongation.
The photoinitiated grafting of N-vinylpyrrolidone (NVP) onto poly(lactic acid) (PLA) film with the use of benzophenone (BP) as the initiator, modified the natural hydrophobic PLA behavior to an hydrophilic film with desirable wettability. The surface photografting parameters-percent conversion of monomer to overall photopolymerization (Cp), percent conversion of monomer to the photograft polymerization (Cg), and grafting efficiency (Eg) were calculated. The resulting film surface was analyzed using ATR-FTIR and UV spectroscopy, derivative spectroscopy and water contact angle. Besides, we demonstrated that the grafted polyvinylpyrrolidone chains could easily react with iodine to form a complex as the homopolymer does with antibacterial activity.
Micrometer-sized composite polymer-magnetic spheres consisting of a magnetic-spherical core with a polystyrene shell were produced. The magnetic-spherical core was produced by plasma thermal conversion of waste powders precursor (iron oxide) generated during the conventional process of steel production. Precursor powders were projected into an Ar-He plasma plume using industrial thermal-spray equipment. The results are a total conversion of the precursor powders into magnetic-spherical particles with diameters in the micrometer size range. The surfaces of the magnetic-spheres were functionalized by a chemistry hydrolysis method using 3-aminopropyltrimethoxysilane (APTMS) and creating superficial amine structures that improved the adherence of the final polystyrene shells that was polymerized by adapting the miniemulsion process. The products at the different synthesis steps were characterized by diverse techniques, such as: X-ray diffraction (XRD), scanning electron microscopy (SEM), field emission scanning electron microscopy (FE-SEM), X-ray energy dispersive spectroscopy (EDS), Fourier Transformed Infrared spectroscopy (FTIR) and the magnetic properties were investigated with a vibrating sample magnetometer.
The surface free energy (SFE) of polylactic acid (PLA) during grafting with N‐vinylpyrrolidone (NVP) was determined from contact angle measurements using the vOCG, Fowkes’, and Owens‐Wendt methods (Harmonic and Geometric mean approximation equations). A good correlation between the results of the three methods was found. Polymer film was obtained by melt extrusion and grafted with NVP using UV light and benzophenone (BP) as photoinitiator. Comparison of SFE results with those from the literature for pristine PLA showed that the correlation depends on the method used for contact angle determination and the properties of the liquids used for this measurement. This finding might promote the rational design of surface modification of biocompatible films.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.