In practice, checks on dangerous goods transports often detect leaks of powdered dangerous goods from valved bags. In this work, the influence factors of a sudden release of powdery substances from the valves of valved bags were investigated. Drop tests were performed on paper bags of UN design type 5M2 with internal sleeve valve using 2 different powdery substances (Esplas H130 and zinc oxide “Rotsiegel”).
The internal sleeve valves of all test samples were not sift‐proof with respect to both filling substances. For almost all test samples, the Esplas H130 powder already leaked out of pasted joints during manual filling. This is a contradiction to the requirement in UN 6.1.4.18.1, according to which closures and joints of paper bags 5M2 should be sift‐proof.
In the drop tests, longer valve lengths had a greater sealing effect for both filling substances (for filling degrees of at least 95% and for test samples which had already been mechanically loaded). As an extreme example, at the drop height of 1.20 m and a filling degree of 100%, the released amount of zinc oxide powder from a 10‐cm‐long valve was about 16 times higher than from a valve length of 12.5 cm. The valve length is therefore a safety‐relevant parameter and should be specified by the manufacturer.
To ensure that only filling goods with similar physical properties in comparison with the test substance are used for valved bags, the user must be informed of the particle size of the test substance.
Safety risks may ensue when the chemicals contained in polyethylene packagings a age and damage them. To prevent subsequent accidents, the European Dangerous Goods Regulations have laid down requirements for testing the chemical compatibility of liquid dangerous goods transported in polyethylene packagings. The test procedures include 6 months in which the chemical is prestored in the packaging. After this time, the respective design-type tests are performed. Alternative methods with so-called standard liquids, simulating the different types of damaging effects, are also possible. If a packaging has successfully passed the design type tests with a standard liquid, other dangerous goods may also be transported in this packaging, as long as it is demonstrated that they have a less damaging effect than the standard liquid. However, in this area there is only little information and research available.A new potentially effective and time-saving method for comparing the stress crack damaging influence of liquids with standard liquids was proposed by a major German chemical company.The validation of this method, which was carried out on two polyethylene materials, showed the general applicability of the method. Two kinds of wetting solutions were applied to simulate cracking under stress.The influence of prestorage, test temperatures, wetting agents and material was examined. FEM calculations were carried out to ascertain the influence of the sample shape.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.