Modern metal melting includes of cast iron production in different types furnaces with specific characteristics. Furnaces usually adopted are cupola and induction furnaces. Casting cast iron is a manufacturing process characterized by its energy-intensive nature (ie, the use of large amounts of energy per unit of product for main activities) and a long tradition. An example of the energy balance in a foundry is the design of procedures to reduce energy consumption. The most important is the consumption of energy in the production of hot metals (52%), therefore reducing the cost of preparing hot metal is especially important by reducing the energy consumption of metal melting. The most important energy cost practices are the consumption of hot metal to produce 1mt of high quality castings (often 1700 kg) and reduce the energy consumption of hot metal production that varies over a wide range (from 500 to 1300 kWh/mt). Although scientific and technological aspects are now well established, new studies seem to be needed to describe "foundry of the future", where energy and material efficiency is of great importance to ensure competitiveness alongside environmental protection. The paper presents specific procedures for reducing both economically important indicators in cupola and electric induction furnaces.
High-chromium cast irons are used as abrasion resistant materials. Their wear resistance depends on quantity of carbides and the matrix supporting these carbides. The paper presents the results of cast irons of chemical composition (in wt. %) 19-22 Cr and 2-4.5 C alloyed by 1.7 Mo + 5 Ni + 2 Mn to improve their toughness, which were tested in working conditions of ferroalloys crushing. Tests showed that these as-cast chromium cast irons with mostly austenitic matrix achieved the hardness of 38-45 HRC, but their relative abrasion resistance Ψ ranged from 1.3 to 4.6, was higher comparing to the tool made from the X210Cr12 steel heat treated on hardness 61 HRC. The transformation of austenite into martensite occurs not only at the worn strained areas (on a surface of scratch) but also in their neighbourhood. Due to the work hardening of relatively large volumes of transformed austenite the cast iron possesses high abrasion resistance also on the surfaces where low pressures are acting. The tough abrasion-resistant cast iron well proved for production of dynamic and wear stressed castings e.g., crusher hammers, cutting tools for ceramic etc.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.